20 Most Recent Yamaha 2004 Kodiak 400 Auto 4x4 Questions & Answers


Sounds like you may have a problem with the float valve in your carberator. If it's stuck open, even when the engine isn't running gas could be building up in the carb because your carb float valve isn't limiting it. And if it's building up and filling the carb, then it will eventually drop into the engine and subsequent oil pan. Look for signs of excess wet gas in the airboxin. That's a sign something in the carb isn't regulating the gas right.

Yamaha 2004... | Answered on Mar 03, 2019


short in wiring or loose wire at a connector. check and repair any found

Yamaha 2004... | Answered on Feb 21, 2019


replace tire should fix it and dont ride on paved road . tires are not rated for paved roads.tie rod ends , wheel bearings loose or bad , control arms . raise front end and look under atv wear if bad enough will b seen. shake each tire and have helper look under at same time to locate the problem. if one side bad replace both sides to prevent more trouble later on. always support both sides w/jack stands before looking under atv. be safe when shaking atv while on jack stands.

Yamaha 2004... | Answered on Feb 20, 2019


I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manual works fine .

Yamaha 2004... | Answered on Feb 08, 2019


fuel filter is in the petcock where you turn the gas on and off

Yamaha 2004... | Answered on Jan 05, 2019


When you check on top of your carburetor ,while the engine is running, you will see fuel being sprayed from one of the jets.That fuel goes to the inlets,so if there is no fuel being sprayed that means there is a blockage on the jets where there is a float.Remove the upper part of your carburetor by taking off the screws.Becafull

Yamaha 2004... | Answered on Dec 13, 2018


The high speed jet isn't rich enough or the carb passages needs to be cleaned. You can move the clip down one spot on the needle so it gets more gas, this will also give you more power at the top end.

Yamaha 2004... | Answered on Oct 08, 2018


According to your VIN Its 1997

The complete info from dmv is
Destination Market: U.S.
Make: YAMAHA
Manufacturer Name: YAMAHA MOTOR CORPORATION
Model: YFM400FW Kodiak 4x4
Model Year: 1997
Plant City: Hamamatsu
Vehicle Type: MOTORCYCLE
Plant Country: Japan
Body Class: Motorcycle - All Terrain Cycle (ATV)
Drive Type: 4WD/4-Wheel Drive/4x4
Displacement (CC): 400
Displacement (CI): 24.409497637
Displacement (L): 0.400000

Yamaha 2004... | Answered on Nov 26, 2017


Sounds to me like you have a bad ground wire somewhere

Yamaha 2004... | Answered on Oct 20, 2017


Check to see if one of the shifter rods behind the side pannel are bent.this usually happens due to lack of lube end people try to force it into gear.

Yamaha 2004... | Answered on Oct 04, 2017

Not finding what you are looking for?
Yamaha 2004 Kodiak 400 Auto 4x4 Logo

Popular Tags

57 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

Kurt Bresler

Level 2 Expert

98 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

 Scott Tx
Scott Tx

Level 2 Expert

604 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kodiak 400 Auto 4x4 Yamaha

  • Kodiak 400 Auto 4x4 Yamaha

Most Popular Question

2000 yamaha kodiak 400 atv no fire

  • ATVs
Loading...