20 Most Recent Polaris 2010 Sportsman 400 H.O - Page 2 Questions & Answers


do you have internet where you live? Try this
"2002 Polaris trailblazer users manual"

ATVs | Answered on Oct 16, 2019


Yea, what you said == just google it.

ATVs | Answered on Oct 16, 2019


Usually, there is a hole plug near the bottom of the casing. BUT first drive it around a lot cause gear oil is heavy and it won't come out very fast if it is cold.

ATVs | Answered on Oct 16, 2019


power to efi module? no, find where it stopped and reconnect.
yes, power out of efi module? no, replace efi module.
yes, open between efi and pump.

ATVs | Answered on Oct 16, 2019


search engine are more efficient. If this isn't to your liking
https://taotao.zendesk.com/hc/en-us/articles/204167645-General-Torque-Spec-Settings-
try searching "clutch nut torque spec"

ATVs | Answered on Oct 16, 2019


I don't understand your problem. What is a "make end"?

ATVs | Answered on Oct 16, 2019


are you into troubleshooting? Probably not, but one must have fuel, ignition, and air to make things burn or run an ICE.
What don't you have?
Is there an ignition source? Did you pull the spark plug and verify it will spark?
Is there fuel? No, not in the tank, it must be getting to the engine.
Is the spark plug wet? If it isn't wet with fuel, you are not getting fuel.
Is there air? No, not what you are breathing, but getting to the carburetor. Did you check the air cleaner?

ATVs | Answered on Oct 16, 2019


It acts like you have burnt spots on the starter shaft that touches the brushes ( voltage) to start. When you rock the vehicle in gear the starter shaft moves and it is placed in a position where the brushes can make a clean contact. Then when you turn the key, the starter will engage and the vehicle will start. My recommendation would be to change out the starter.

ATVs | Answered on Oct 15, 2019


check wire harness for short

ATVs | Answered on Oct 10, 2019


It sounds as though your ignition switch is not hooked up correctly. Follow the harness from the ignition switch to the bullet connectors under the front body plastic. Make sure the colors all match up.

ATVs | Answered on Oct 08, 2019


Even though the overflow is full, the radiator could be empty. You need to remove the radiator cap and make sure it is full to the top. If you find the fluid level is low in the radiator, that would indicate there is a leak in the hose between the radiator and the overflow tank.

ATVs | Answered on Oct 08, 2019

Not finding what you are looking for?
Polaris 2010 Sportsman 400 H.O Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Polaris ATVs Experts

unhappyed

Level 2 Expert

106 Answers

john h

Level 3 Expert

22425 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Polaris ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sportsman 400 HO Polaris

  • Sportsman 400 HO Polaris

Most Popular Question

courses back fire when back off

  • ATVs
Loading...