20 Most Recent 2008 Chevrolet Chevrolet Cobalt LT Questions & Answers


One possibility:
https://www.youtube.com/watch?v=vmOY-fygOrA

2008 Chevrolet... | Answered on May 13, 2017


Go to the NTSB web site with your VIN number it should show you any recalls your vehicle may qualify for.

2008 Chevrolet... | Answered on Jan 19, 2016


Please go here on pc, it will tell you in detail whats possibly wrong. obd-codes.com/po449, God-Bless!

2008 Chevrolet... | Answered on Dec 29, 2015


This is replaceable but you should be able to put a screw driver into the broken off part and still push the engagement button for some ghetto shifting.

2008 Chevrolet... | Answered on Dec 20, 2015


Po2430 is the code for the secondary air injector system air flow pressure sensor circuit on bank one. The sensor will be in the front of the engine down at the bottom. You can goggle po2430 and the diagram will help you to see where it is just put In the year and model of the vehicle and the code.

2008 Chevrolet... | Answered on Sep 19, 2015


DTC P2430 : Secondary Air Injection (AIR) System Pressure Sensor Circuit
Circuit/System Description
The secondary air injection (AIR) system aids in the reduction of hydrocarbon emissions during a cold start. The system forces fresh filtered air into the exhaust stream in order to accelerate the catalyst operation. An electric air pump, the secondary AIR injection pump, provides filtered air on demand to the AIR control solenoid valve/pressure sensor assembly. The AIR control solenoid valve/pressure sensor assembly controls the flow of air from the AIR pump to the exhaust manifold. The AIR solenoid relay supplies the current needed to operate the AIR control solenoid valve/pressure sensor assembly. A pressure sensor is used to monitor the air flow from the AIR pump. The engine control module (ECM) supplies the internal pressure sensor with a 5-volt reference, an electrical ground, and a signal circuit.

2008 Chevrolet... | Answered on Sep 14, 2015


go to a chevy dealer and ask them bout replacement

2008 Chevrolet... | Answered on Jun 18, 2015


Replace the starter and the starter solenoid. 99% sure the starter windings have simply shunted.

2008 Chevrolet... | Answered on May 13, 2015


depending if its front or rear if its in the rear most likely the brake wheel cylinder , and your brakes is part of the traction control why its off, you should make sure brake fluid is full and get it fix

2008 Chevrolet... | Answered on Mar 11, 2015


Crank positions sensor might be broke due to collision. Sensor is on the front of the engine at the crank cover. It is what tells the coil pack as to what cylinder to fire in, since the newer engines start on any cylinder instead of only No. 1.

2008 Chevrolet... | Answered on May 13, 2014


I can't say for sure on your Cobalt, but many GM cars will exhibit your car's symptoms when the negative battery cable isn't secured tightly enough to provide a solid ground. Carefully check the cable connections by attempting to move the cable back and forth where it mounts to the battery, car chassis, or anywhere continuity could be interrupted.

2008 Chevrolet... | Answered on Apr 01, 2014


The security, antitheft, or passlock light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterperates this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle.
This link may help you find ways to bypass this or fix it yourself.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

2008 Chevrolet... | Answered on Nov 01, 2012


As far as I know, the engines are basically identical on the outside. The problem with engine swapping on these computer-controlled cars is, you also have to change the computer since each engine has a computer programmed for that particular engine. This often requires not only changing the computer but also changing wiring harnesses to match. In short, the engines will most likely swap but it is the computer that makes the difference.

Chevrolet Cars &... | Answered Yesterday


Did you happen to find small pieces of plastic in the driver's floorboard? If so you unwittingly found the problem. The brake light switch is mounted so its plunger presses against a small plastic insert. The insert is pushed into a hole in the break pedal arm. When the brake is not depressed it rests the the upmost position so when the insert (when intact and unbroken) does the pushing up against the brake light switch plunger. Check the condition of the insert in the brake pedal arm and replace if necessary.

Chevrolet Cars &... | Answered 2 days ago

Not finding what you are looking for?
2008 Chevrolet Chevrolet Cobalt LT Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Chevrolet Cars & Trucks

  • Chevrolet Cars & Trucks

Most Popular Question

stop lp fuse mean in bcm box inside car

  • Cars & Trucks
Loading...