20 Most Recent 2008 Acura Mdx Questions & Answers


This requires the removal of the door panel, I can walk you through it if you contact me at https://www.6ya.com/thericepatch

2008 Acura Mdx | Answered on Feb 21, 2019


Let me help you now those are going to be your high intensity discharge bulbs I have a lot of experience with those let me tell you what you do the HID bulbs come with a u clamp okay once you take off that plastic cylinder all of the parts are inside I understand that now what it is sir it's a simple you clamp and what you do to get your index finger push it inside there and take the ear off of the clamp and want to take both ears off in the light assembly comes out make sure that you watch your lighting assembly that the bottom of your HID bulb which is going to be the huge black Bart huge Graybar make sure great bars on bottom put those suckers back in there and put those plants back on and tighten it up

2008 Acura Mdx | Answered on Feb 06, 2018


Acura Service Codes

A: Replace Engine Oil
B: Replace Engine Oil and Filter. Inspect various systems and components

1: Rotate Tires and check tire pressure and condition
2: Replace air cleaner element, check drive belt and replace dust and pollen filter
3: Replace transmission fluid and transfer fluid (if equipped)
4: Replace spark plugs, replace timing belt (if equipped), inspect water pump, and inspect value clearance
5: Replace Engine Coolant
6: Replace rear differential fluid (if equipped)

2008 Acura Mdx | Answered on Jun 23, 2017


On the '04 MDX the mirror adjustment selection switch has to be in the middle position of L & R, for the mirror to re-adjust when the car is in reverse. I hope this helps.

2008 Acura Mdx | Answered on Jun 23, 2017


Acura Service Codes

A: Replace Engine Oil
B: Replace Engine Oil and Filter. Inspect various systems and components

1: Rotate Tires and check tire pressure and condition
2: Replace air cleaner element, check drive belt and replace dust and pollen filter
3: Replace transmission fluid and transfer fluid (if equipped)
4: Replace spark plugs, replace timing belt (if equipped), inspect water pump, and inspect value clearance
5: Replace Engine Coolant
6: Replace rear differential fluid (if equipped)

2008 Acura Mdx | Answered on Jun 23, 2017


This code is oil change needed

2008 Acura Mdx | Answered on Jun 23, 2017


On this website (link below) you find fuse box diagram and description for Acura MDX (2004)

Acura MDX 2004 fuse box diagram Auto Genius

2008 Acura Mdx | Answered on May 27, 2017


Conduct a dealer closer to you

2008 Acura Mdx | Answered on Jul 23, 2016


If your Acura has a separate amplifier, its power fuse may have opened.

2008 Acura Mdx | Answered on Dec 26, 2015


Hi Linda.
Modern cars have systems that work okay as long as the battery is kept in top shape. Sometimes vehiclws act flaky because the battery charge level has fallen below a critical point. This may be the cause of what you describe.
Ensure that your battery is full of electrolyte, (water and acid,) then charge it to maximum capacity.

Does this resolve the issue.
If it does not have the BCM checked. The body control module is responsible for several of the electrical systems on the body rather than the engine/transmission /steering/braking systems. This may be playing up

2008 Acura Mdx | Answered on Jun 28, 2015


its on the side of the motor that cylinder #1 is on in that exhaust pipe that comes off that head. its the first exhaust sensor that you come to when you follow the exhaust pipe.

2008 Acura Mdx | Answered on Jun 24, 2015


You will have to contact an Acura dealer. Given the VIN number of your car they can tell you the radio code as long as it is the original radio.

2008 Acura Mdx | Answered on May 29, 2015


If you filled the tire, it should have went off. (bad sensor) If you had one replaced the shop should have reset it. If you had new tires put on, they also should have reset it and put in the locations of sensors.

2008 Acura Mdx | Answered on May 12, 2015


OK, i googled it for you

http://acurazine.com/forums/third-generation-tl-2004-2008-93/service-a23-901767/

and it's also in your owners manual!

here's a pdf form if you don't have one:

http://techinfo.honda.com/rjanisis/pubs/OM/AH/BTX0808OM/enu/BTX0808OM.pdf

goto page 390 for the explanations

2008 Acura Mdx | Answered on Apr 10, 2015


You have to remove each coil using an 8 mm allen head socket. The spark plus are under the coils. This only needs to be done every 105,000 miles. Use the recommended NGK spark plug, platinum or iridium.

2008 Acura Mdx | Answered on Mar 06, 2015


  1. Remove the center console. ....
  2. Disconnect the 2P connector (A) from the rear blower motor (B), then remove the wire harness clips (C). Remove the self-tapping screws and the rear blower motor from the rear HVAC unit.
  3. Install the motor in the reverse order of removal.

2008 Acura Mdx | Answered on Dec 13, 2014

Not finding what you are looking for?
Cars & Trucks Logo

154 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Acura MDX
2004 Acura MDX

226 Questions

2003 Acura MDX
2003 Acura MDX

182 Questions

2001 Acura MDX
2001 Acura MDX

162 Questions

2002 Acura MDX
2002 Acura MDX

152 Questions

2005 Acura MDX
2005 Acura MDX

142 Questions

Top Acura Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MDX Acura

  • MDX Acura

Most Popular Question

reset tpms 2008 acura mdx

  • Cars & Trucks
Loading...