20 Most Recent
Questions & Answers
I have a 2004 Dodge Dakota, V6, 3.7L, with the 42RLE transmission. The tranny died last week, and I have replaced it with a used 42RLE from an '05 Dakota. Shift lever on steering column in park. Shift selector on transmission in park. Gear indicator on dash tells me I am in reverse, truck will not start. Cycle shift lever through all gears, indicator stays in reverse until drive, then matches for drive, second, and low. On the way back up, stays in drive through reverse, no neuteral or park. Haynes manual for my truck mentions checking the ohms between pins on transmission range sensor, but shows it external on the case. Everything I can find on the 42RLE shows it internal in the valve body. Also Haynes does not list the 42 RLE as one of the transmissions covered. Help?
I recently had my engine replaced in my 2002 grand marquis 4.6 with a 2009 crown Vic 5.4 engine and was running fine until I broke my ignition and tried to replace it myself I bought a new ignition switch didn't work so I bought a steering column and still won't start what do I d?
I landed on this website reliable-store.com and they got me free manuals so I used it to repair and it works fine
on Sep 24, 2019
Roaring sound front left wheel, maybe a wheel bearing?
It could be the the wheel bearing...again, as you said. I also would like to know if you had the front end aligned when you changed the wheel bearing. If the tires have excessive wear on the outside or inside tread, you are out of alignment and BOTH wheel bearings need to be changed! It could also be the brakes wearing thin...check it out!
on Jun 29, 2018
How can i tell if my crank shaft sensor is bad?
If the crank sensor fails it will probably stop the engine. I have known a diesel engine continue running with a failed crank sensor but it was virtually undriveable and sounded really rough.
Pumping the loud pedal isn't likely to be very helpful whatever is wrong. Pedal pumping is for older cars with a carburettor that isn't in good order.
The best help will be from a guy with a scanner...
on Sep 17, 2017
Not finding what you are looking for?