20 Most Recent 1990 Ford Thunderbird Questions & Answers


If the fan wont blow air at all then it is a fuse. If the fan works and the car is warm you have a clog somewhere. you could try pulling a heater hose off when the car is cold to check for flow.

1990 Ford... | Answered on Sep 30, 2018


I suggest you get one of those manuals people get nowadays to do it yourself.. My brother used it to repair my car and it's totally repaired now.
he got it from. www.reliable-store.com

1990 Ford... | Answered on Mar 07, 2018


foam and bubbles indicates head gasket problem
have a compression test done

1990 Ford... | Answered on Jan 20, 2018


To adjust your headlights you need to turn the stud that sticks through the support of the retainer connecting your headlights to the header panel. Use a 4mm socket or wrench. Been a while since I had mine, but I seem to recall it being a rather tight area to work with.

Each headlight has 2 studs you can adjust if I remember right, Left/Right and Up/Down. The stud closer to the inner parking lights or inner high-beams adjusts your Up/Down motion. The studs closer to the outer corner signal lights adjust the left/right.

1990 Ford... | Answered on Feb 10, 2017


Your coil went out. First, check elec. connection to the coil. If they are okay, try replacing the Coil. They don't cost too much.
26056856-l4owoqja4vibs0h3wfxhjsoe-1-0.jpg

1990 Ford... | Answered on Jan 17, 2016


why would you blindly start something that you have no clue about,im not telling you what tools you need,because you need to do a little investigating and you will find out, http://www.bing.com/videos/search?q=replacing+a+ignition+switch+1990+Ford+Thunderbird&FORM=HDRSC3

1990 Ford... | Answered on Jun 24, 2015


Hi Elikapeka . which engine is in your Thunderbird? Also Why do you want to know? is it not running?
the V6 3.8 litre firing order is:
V-6 Firing Order: 1-4-2-5-3-6
if you are having running problems and you have the big carburetor rather than injection. a good tuner guy is your expert and these guys do it by ear if they know what they are doing.

1990 Ford... | Answered on Apr 04, 2015


What happens if you give it a little gas ? Hold the RPM's up , will it keep running then ? How does it Idle , smooth or ruff ? Does the idle seam low ?

1990 Ford... | Answered on Mar 23, 2015


panel is under the dash to the left of the steering colume.

1990 Ford... | Answered on Sep 19, 2014


usually under the dash, LH side of the steering wheel. Some models require removal of plastic 'kick' panel to access.

1990 Ford... | Answered on Sep 19, 2014


I would take proof of ownership to a ford dealer and inquire at the service desk. they can steer you in the right direction.

1990 Ford... | Answered on Apr 27, 2014


what do you mean popping the ignition

1990 Ford... | Answered on Jan 08, 2014


run fault codes and look for a TCM problem in the transmission

1990 Ford... | Answered on Dec 05, 2013


No . it is not normal to have to this as the Cross is bolted to the pinion flange with 2 small bolts for each side. The drive shaft will slide out of the rear of the gear box normally or if there is a flange there unbolt the 2 halves of the flange and remove it . Some diff pinions have the same arrangement depending on the make and capacity of the diff and torque requirements

1990 Ford... | Answered on Dec 05, 2013

Not finding what you are looking for?
1990 Ford Thunderbird Logo

188 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Thunderbird Ford

  • Thunderbird Ford

Most Popular Question

1990 ford thunderbird 6 cylinder shuts

  • Cars & Trucks
Loading...