1994 Jeep Grand Cherokee - Answered Questions & Fixed issues


You have a blown power booster. It is leaking vacuum and you will have a hard brake pedal and find it tough to stop your vehicle. Replace the power booster and you will have brakes and no more leaking air sound.

1994 Jeep Grand... | Answered on Jul 04, 2019 | 22 views


Try this one, says its for a 1994 Cherokee, no mention of engine type but it look like a V8 would..
1994 jeep grand cher.-gbvdwzazhmsxyfemnsd4fk1i-3-4.png

994 jeep no ac routing-gbvdwzazhmsxyfemnsd4fk1i-3-2_0.png

1994 Jeep Grand... | Answered on May 01, 2019 | 332 views


Check the motor and transmission mounts

1994 Jeep Grand... | Answered on Mar 09, 2019 | 72 views


On a 94 Jeep Grand Cherokee check fuse 17 should be a seven and a half amp fuse if the fuse is good go under the hood to your power distribution center look for the air conditioning relay swap it with one of the other ones several of those are Universal fit see if it works then

1994 Jeep Grand... | Answered on Feb 05, 2019 | 510 views


I'm having a problem with my tranny not wanting to shift automatically at all. Seems like a dead stop its stuck in low gear. Have to manually shift and does not go into overdrive. I have a 1993 Jeep Grand Cherokee. Can anyone help me cause I've swiched out throttle control sensor, filter change, new tranny cooler and heavy duty lines. I'm at a loss and scratching my head. Any advice would be greatly appreciated

1994 Jeep Grand... | Answered on Dec 31, 2018 | 1,361 views


first place I'd look is around the perimeter of the heads (I assume you mean head gaskets?) Make sure you haven't inadvertently gotten a wire pinched in between the head & block somewhere.

1994 Jeep Grand... | Answered on Sep 30, 2018 | 190 views


Hi. Thanks for your question. For issue related to jeep cherokee laredo you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

1994 Jeep Grand... | Answered on Mar 23, 2018 | 117 views


so all 3 FOBs are dead? is that it??????
so the which part of the system is failing
the ASD relay cuts starts, 7 ways, one is security. called VTSS.

i guess the security light is telling you, that it is not happy? in the dash cluster, is that it?
94 or 96?
so it , flashes ext. lamps, honks horn, and wont start.
page 8q-1 FSM.

http://www.jeepforum.com/forum/f13/how-disable-your-alarm-your-zj-483020/

endless post. on topic. read it, try it.

better yet, diagnose it.
scan the PCM to find out why the ASD relay drops out
does it? that is the first test in all, no starter.
http://www.fixkick.com/Jeeps/ASD.html

if the battery is discharged, bad things happen as the security logic
goes nuts. (the chips dont yet run on "free energy" )

1994 Jeep Grand... | Answered on Feb 24, 2018 | 204 views


Change your compressor with the new one.

1994 Jeep Grand... | Answered on Feb 23, 2018 | 64 views


no
that is a boot retainer clip and should be attended to as ir prevents dirt getting into the joint
There is a wire around that point that goes to a sensor got the ABS and it may be loose or damaged
have the boot checked out and if it is cracked have a drive line shop replace it

1994 Jeep Grand... | Answered on Feb 14, 2018 | 48 views


Check your exhaust many times it'll be a o2 sensor wire touching the manifold causing the short to ground. Start there let us know. Hope this helps.

1994 Jeep Grand... | Answered on Jan 10, 2018 | 234 views


Have you checked it for engine codes? Trouble codes should point you in the right direction.

1994 Jeep Grand... | Answered on Dec 26, 2017 | 69 views


possible tps issue.

1994 Jeep Grand... | Answered on Dec 24, 2017 | 59 views


Change the temperature sending unit/temp sensor. When starting, the sensor will tell the computer to put the engine in cold start mode to give a bit more fuel and raise the idle a little so it WILL start and keep running without ever touching the throttle. Once warm-up is completed, this sensor will tell the computer to stop the cold start mode and go to normal run mode. THAT is your only problem.

1994 Jeep Grand... | Answered on Dec 07, 2017 | 72 views


It could, in fact, be an intermittent open at the solenoid.
Make certain all the cables are connected properly and are appropriately tightened.

1994 Jeep Grand... | Answered on Nov 03, 2017 | 46 views


I'd start with a new flasher relay (they're cheap). If not that, then go to those lamp sockets and check for corrosion. I had issues similar w my 95 laredo...it was the flasher.

1994 Jeep Grand... | Answered on Oct 27, 2017 | 57 views

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

2,882 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...