Question about 2000 Ford Taurus

2 Answers

2000 ford taurus strange noise when accelerating when vehicle is warm

When vehicle is warm here a strange almost popping noise from passanger side of vehicle as soon as u let of gas noise is gone also must be med to hard acceleration cannot get it to make noise by power braking or up on a lift have takin belt off and drivin noise still there heatshield seems ok baffled

Posted by on

  • don-ohio Jan 28, 2012

    When a coil pack starts to go bad,or spark plug wiring,or even the spark plugs, you can get that backfire type of sound.How many miles on it?
    A bad coil pack will show up in the OBDII codes.Auto-Zone will read them for you.
    don-ohio (:^)

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 89 Answers

Check the stabilizer bar. It will make a lot of noise and is a easy fix. Shows up during acceleration

Posted on Jan 20, 2018

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,234 Answers

Start with don's post..
inner cv joints will make noise too. but not really popping as you said. more a click click....

Posted on Jan 10, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

SOURCE: Ford Focus

Sounds like it could be your driveshaft bearing

Posted on Aug 26, 2008

  • 4 Answers

SOURCE: misses during acceleration , rough

Go get the codes ran at auto zone or advance auto parts they will do it for free. If the codes come up as a cylinder miss-fire then it is most likely a coil (being a ford). Write down which cylinder it is. I wouldn't replace any of the spark plugs , useless you have more than 100,000 miles. If you have to replace the spark plugs use BOSH double plautim or better. The cylinder placing is ( as your are looking at the front of the truck) passenger side front to back 1-2-3-4 driving side front to back 5-6-7-8. If you never seen a coil buy one so you know what you are looking for. The coil is held in by a 7mm bolt. Take the bolt out and replace the coil. Problem Solved. Estimated time 20 Mins with 60 dollars per coil.

Posted on Mar 18, 2009

tshot2020
  • 23 Answers

SOURCE: 2004 Ford Taurus V6 noise underhood appears to be belt

Sounds like a bad idler pulley,or belt tensioner. Most likely not water pump since the check engine light is not on. Altho it couold be the water pump and for some reason (bad sensor, burnt out light) the check engine isnt coming on. Either way it would be best to have it looked at.

Posted on Apr 21, 2009

gypsycat00
  • 224 Answers

SOURCE: 2002 Ford Taurus has problems accerlerating...

It sounds like the fuel is not being delivered sufficently to the engine. Try looking here. Perhaps a fuel injecter cleaner (you can pour Seafoam into the gas tank and it is a great fuel injecter cleaner and fuel stabilizer). What did your plugs look like when you replaced them? This can tell you a lot about the combustion chamber. A Haynes manual will be invaluable to you.

Posted on Jun 11, 2009

  • 14092 Answers

SOURCE: loss of power on acceleration. engine bucking.

check transmission fluid.change fuel filter and air filter.try changing up on where you buy gas .because bad gas causes problems.

Posted on Jun 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chirping noise when accelerating


If it is a belt noise, sprinkling baby powder on the belt will make the noise go away. Apply liberaly with engine off onto the belt and start the vehicle. The belt may have gotten coolant on it and this will cause the chirp. Also a defective belt tensioner will cause the belt to chirp

Jan 04, 2016 | 2002 Ford Taurus

2 Answers

94 Ford Taurus popping noise on hard acceleration


What about the CV joints or the splined shaft that goes into the hub ?

Jul 05, 2013 | 1994 Ford Taurus

1 Answer

Rattling noise when accelerating


I would need to know what vehicle this is? 4 Cylinder. V6? 3.0? There are a few things it could be,

If the Engine is Moving, it could be hitting something so I would check the Motor Mounts (Happens quite Frequently on Taurus)

Check the Tension of your Serpentine Belt

Apr 05, 2013 | Ford Fusion Cars & Trucks

1 Answer

Ford taurus 2000,air conditioner makes strange noise when ac is on


I think the AC belt is worn or loose either tighten it up or buy a new one. Or it could something else.

______________________
Autel DS708

Jun 17, 2012 | 2000 Ford Taurus

1 Answer

Front passange wheel making click noise


this sounds like your CV boot. have it looked at.

Feb 07, 2012 | 2000 Ford Taurus

1 Answer

Why does my 2000 ford taurus wagon shudder during acceration in 1st gear? Almost feels like transmission or fuel pump issue!


Does it do it worse when you are turning..Could be a inboard cv axle..They shudder when you accelerate..An out board joint pops when you turn hard..

Oct 05, 2011 | 2000 Ford Taurus

2 Answers

I have a 2000 ford Taurus that putts at idle, but not at acceleration. Car stalls when not warmed up. I have to keep my foot on gas pedal to keep car from stalling when warming up. I've had oxygen...


There is an idle control valve in the air intake circuit that gets dirty. Ford says not to clean this valve but to replace it. However cleaning seems to work for me.

Aug 04, 2011 | 2000 Ford Taurus

1 Answer

A solonoid passanger side firewall 1999 ford


I believe that is the EGR solenoid

Jul 06, 2009 | 1999 Ford Taurus

1 Answer

Noises in my 99 ford taurus


My first thought is to have the Catalytic converter inspected. Many time the converters will have the insides break away and begin to float around, the insides of the converters look like a honey comb and after the engine is good and hot the dislodged piece will adhere to the other parts of the honey comb thus making the rattle go away.

Apr 06, 2009 | 2001 Ford Taurus

1 Answer

2000 Ford Taursus 3.0 liter--popping noise when turning right and left.


either its something wrong in your steering rack or a ball joint or your axels are going bad and need to be rplaced

Nov 10, 2008 | 2000 Ford Taurus

Not finding what you are looking for?
2000 Ford Taurus Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...