Question about 1998 Ford Escort

1 Answer

Where is ccrm located on 98 escort zx2 located

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Constant Control Relay Module is located right underneath the air cleaner box. Please be sure to replace it with the correct module, they are not the same. Use all the numbers on the old one, like F8CZ-12B577-AA, AB, AC, there are others.

Posted on Oct 04, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 85206 Answers

SOURCE: Where is the fuel filter located on an 98 Escort Zx2?

it is on the firewall under the hood, here is a picture.
7bd6a46.gif

Posted on Apr 30, 2009

  • 19 Answers

SOURCE: serpentine belt installation

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} 1 To replace a worn belt, locate the idler or generator pulley.
2 Loosen the hold-down fastener for the idler or generator pulley.
3 Pry the idler or generator pulley inward to release the belt tension and remove the belt.
4 Match the old belt up for size with the new replacement belt.
5 Observe the belt routing diagram in the engine compartment.
6 Install the new belt over each of the drive pulleys. Often the manufacturer recommends a sequence for feeding the belt around the pulleys.
7 Pry out the idler or generator pulley to put tension on the belt.
8 Pry out the idler or generator pulley to put tension on the belt.
9 Install the belt squarely in the grooves of each pulley.
10 Before adjusting belt tension, check for proper pulley alignment. This is especially critical with serpentine belts. Measure the belt deflection in its longest span. If a belt tension gauge is available, use it and compare the tension to specifications.
”If a belt is too tight, wear to bearings for the water pump, alternator, and engine crankshaft can result.”
11 Pry the idler or generator pulley to adjust the belt to specifications.
12 Tighten the idler or generator pulley fastener.
13 Start the engine and check the belt for proper operation.

Posted on Jan 10, 2009

  • 95 Answers

SOURCE: My 98 Escort ZX2 manual transmisson seems to shift gear hard!

Clutch may be smooth but this is a sign of the clutch needing replaced. Some of these models have a linkage adjustment under the hood. Others are hydrallic and need fluid. Look under the hood where the steering is and see which you have and address accordingly. Good luck. Check on costs of clutch replacement.

Posted on Mar 30, 2009

SOURCE: how do I change my oil on my 98 ford escort zx2

Try this.

On level ground, jack up the front of the car and support it with axle stands.

Get an open container that will take more than 5 ltrs.

Under the engine block you will find the sump.

On the sump you should find a 13mm nut, this is the drain plug.

Undo the drain plug and have the empty container directly below the sump plug.

Retain the sump plug and clean it with a rag.

When the oil has drained out of the sump, put back the plug making sure the washer is in good condition and the plug is tight.

Now unscrew the oil filter having the old oil container below the filter housing to catch any oil.

Wipe around the the filter housing to remove any and all old oil.

Now offer up the new oil filter but do not tighten.

If the new filter fits the oil filter housing, then remove it and lightly oil the rubber seal on the filter with clean oil.

Now refit the filter and tighten it up. Not too tight, you can do this by hand but get it as tight as you can.

Now lower the car to to the ground.

At the top of the engine you will find an oil filler cap. Undo this cap.

Now put in the new oil to just below the full mark on the dip stick. Let the oil drain through the engine to the sump for a couple of minutes before checking the oil level.

If the level is between 1/2 and full, replace the filler cap and start the engine.

Now look at the oil filter and the sump plug for any leaks. Also check around the oil filler cap for oil leaks and spillage.

With the engine turned off. Clean any oil spillages and tighten up the oil filter, sump and oil filler cap as required.

Now leave the oil to drain back to the sump for a few minutes.

Check the oil level and top up as required.

I find that it is best to top the oil up to just below the Max mark.

This should solve the problem.

Ray



Posted on Aug 28, 2009

  • 1 Answer

SOURCE: belt routing diagram 98 zx2 2.0

1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

Where is the fan relay on ford zx2 2001


The cooling fan relay is part of the CCRM (constant control relay module) and it is located under the air filter box. This is listed as non-serviceable but if you can solder, you can take the box apart and get a new relay from Radio Shack and install it yourself.

Aug 04, 2010 | 2001 Ford Escort ZX2

1 Answer

Where is the A/C relay located in a 1998 Ford Escort ZX2?


The system doesn't have an individual relay for AC. It is controlled by the CCRM. Here is a wiring diagram. Hope it helps you.. :-)
89f03ee.gif

Jul 20, 2010 | 1998 Ford Escort

1 Answer

98 Ford Escort zx2 2.0L 4 cyl 5 speed transmission PVC Valve


LOOK ON INTAKE AROUND AIR FILTER HOUSING AND VALVE COVER.

Apr 15, 2010 | 1998 Ford Escort

1 Answer

I need to find the powertrain relay on my 1999 ford escort zx2


Which relay? The CCRM has the PCM power, fuel pump power, and a/c compressor power relays in it. It is located under the air filter box.

Jan 09, 2010 | 1999 Ford Escort

1 Answer

I need to replace the drive belt on my 98 Ford Escort ZX2 manual transmission and need a diagram and to know where the tensioner is located. It is a single belt.


There are 3 possbile diagrams, depending on whether it's equipped with AC and engine type. The 3 are listed below. Thank you for using Fixya and please remember to return to rate this answer.
Greg

98 Escort Drive Belt Air #1
289d121.jpg


98 Escort Drive Belt Air #2
91346f7.jpg

98 Escort Drive Belt no Air
30a8765.jpg

Dec 20, 2009 | 1998 Ford Escort

1 Answer

Looking for location of a/c relay on 2001 ford escort se


The relay is located in the CCRM. The CCRM is under the air filter box.

Nov 17, 2009 | 2001 Ford Escort ZX2

1 Answer

2001 ford escort a/c relay location


The relay is in the CCRM. The CCRM is below the air filter box.

Oct 19, 2009 | 2001 Ford Escort ZX2

2 Answers

Where is the speed sensor location for a 98 ford escort (automatic)?


It is mounted on the transmission. Hope this helps and best wishes.

Aug 08, 2009 | 1998 Ford Escort

1 Answer

Where is the fuel filter located on an 98 Escort Zx2?


it is on the firewall under the hood, here is a picture.
7bd6a46.gif

Apr 30, 2009 | 1998 Ford Escort

Not finding what you are looking for?
1998 Ford Escort Logo

Related Topics:

482 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...