Question about 2007 Jeep Grand Cherokee Overland
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
go throu licence plate pannel pull up on bar and on the inside under ur pannel the nut fell off the mechanism so just put on a new nut
Posted on Feb 03, 2009
SOURCE: Rear Axle Seal Replacement
remove rear tires, then remove brake calipers and rotors, then remove the 4 nuts (each side) that hold the axle shafts to the axle tube (located around the axle tube behind the backing plate) then using a slide hammer pull the axle shafts out, next using a die grinder and an air hammer get he retainer collar and the bearing off (without damaging the axle shaft) then remove the seal and the outer race which will still be in the housing. next put it all back together, make sure the plate with the studs is still on then slide the seal, bearing, then retainer on (all new parts) and using a press push them all the way back on. then is simple reassembly.
Posted on Apr 22, 2009
yah direct ignition coil pack does away for the need a a distributer cap and rotor.much higher energy ignition system where the computer tell when to fire.if that helps.not hard to change.as long as you change them one at a time so you don't screw up the order.
Posted on Nov 28, 2009
Tips for a great answer:
Sep 18, 2016 | 1996 Jeep Grand Cherokee
Oct 04, 2013 | 2008 Jeep Grand Cherokee
Jun 27, 2011 | 2002 Jeep Grand Cherokee
Aug 19, 2010 | 1997 Jeep Grand Cherokee
Jul 16, 2010 | 1994 Jeep Grand Cherokee
Oct 15, 2009 | 1997 Jeep Grand Cherokee
Oct 01, 2009 | 2004 Jeep Grand Cherokee
Feb 12, 2009 | 1997 Jeep Grand Cherokee
Jan 26, 2009 | 1996 Jeep Grand Cherokee
Nov 11, 2008 | 2000 Jeep Grand Cherokee
40 people viewed this question
Usually answered in minutes!