Question about 2011 Dodge Ram Pickup 1500
Idler tension seems to only go one direction
Posted by Anonymous on
You can get a diagram from the dealer and the idler tension is the first you start to remove the belt and the last place you connect your belt. Today's car and trucks are very easy to replace the belt. I learned you start at the bottom and work your way up to the tensioner. Go for it. It's easy work
Posted on May 03, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There should be a diagram under the hood on the fan shroud or radiator support. If not, let me know and I see if I can find one. For the most part, if the pulleys it rides on are grooved, the belt ribs ride on it, it the pulley is smooth, the back side rides on it. From a picture of the alternator I have, from the passenger side coming up, over the alternator, then down and under the belt tensioner (smooth pulley), then up and over A/C compressor, then down and around P/S pump, up and around water pump, down around crankshaft pulley.
Posted on Jun 03, 2009
Here's your belt diagram.
if it's not correct let me know and I'll get you all the routing diagram for that year ram 1500.
Hope it helps.
Posted on Nov 17, 2009
You will find it in this Dayco PDF document. It is diagram 7.57 on page 124. The vehicle is listed on page 40 (2006 Dodge RAM pick ups) with the reference to the belt routing diagram. Copy and paste this web address into your web browser and away you go.
(If you have trouble with this then open this web page below and click on the serpentine belt routing guide PDF to open the PDF document...............
Posted on Dec 29, 2010
I just had the same problem, new cap, deleted the codes with a obd... took it to the dealership...
its the EGR valve that was bad on my truck 2007 dodge ram 45000 miles...
i get it back on friday, its a simple part 1 wire harness and 2 bolts and gasket.
Posted on Mar 10, 2011
Tips for a great answer:
May 30, 2014 | Cars & Trucks
Mar 27, 2011 | 2005 Dodge Ram 1500
Mar 17, 2011 | 2004 Dodge Ram 1500
Jun 09, 2009 | 1998 Dodge Ram 1500 4WD
Jul 27, 2008 | 1995 Dodge Ram
Jan 11, 2017 | 2011 Dodge Ram Pickup 1500
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: