Question about 2007 Ford Territory 4.0

2 Answers

How do I remove the tail light? - 2007 Ford Territory 4.0

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 39 Answers

On the ford territorys they have two screws that you will find once you open the tailgate remove both of these screws then try give the tail light a slight tug away from the vehicle directly backwards from the vehicle don't pull them sideways as they have a lock pin that may break if you cant get it to move you need to find a soft plastic lever and gently push it between the taillight and the side of the vehicle body (it is a good idea to put masking tape on the paint and the lever to reduce the chance of marking the paint) once it comes off apply a small amount of crc to the locator pin this will make it easier to remove if you ever need to get it off again
cheers paul

Posted on Dec 06, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 90 Answers

In the boot along the boot carpet towards the back of the lights there should be part of the carpet that could be pulled behind that u will find the nuts or bolts for the lights

Posted on Jun 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change stop/tail lamp on Scenic dci 2011. I've removed the two visible screws but the light cluster will not move! Can you help please?


With the hatch open there are two T-20 torx screws on the tail light that need removed. Tail light should come out unless for some reason someone has sealed it in with a silicon or some other adhesive. May have to pry gently on tail light next to area where screws are removed to pop out tail light. Will have to unplug electrical connection from back remove light from vehicle. 3 tabs on back of tail light to manipulate to remove bulb section.

Apr 01, 2017 | Cars & Trucks

Tip

How to Remove Tail Lights on a Daewoo nubira Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Daewoo Nubira Cars & Trucks

Tip

How to Remove Tail Lights on a Buick Riviera Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Buick Riviera Cars & Trucks

1 Answer

Remove tail light on a 1998 el ford


To remove the tail lights screws can be located in 2 places on the outside of the vehicles there is 3 to 4 screws to be removed or 3 to 4 screws may be located on the inside or back of the light. Remove these screws and the tail light assembly should become free. Remove and replace with new tail light and tighten the screws back down and your done.

Nov 28, 2010 | Ford Futura Cars & Trucks

1 Answer

How to remove and replace tail light assembly on 2003 jeep grand cherokee. There's one screw behind the rear quarter panel to complete the removal process of the tail light assembly. How do I remove that...


There is 2 screws located on the side when you open your tail gate by the tail light. remove these 2 screws and pull the tail light out and disconnect the wire connector. Hope this helps.

Best of luck

Jun 13, 2010 | 2003 Jeep Grand Cherokee

Tip

How to Remove Tail Lights on a Chevrolet blazer Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Chevrolet Blazer Cars & Trucks

Tip

How to Remove Tail Lights on a Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Eagle Vision Cars & Trucks

2 Answers

How to remove the tail lights from a 2003 murano


Here's the step by step procedure from the beginning.
  1. Carefully remove the black one inch wide plastic molding strip that runs along the interior side of the tail light. This can be pried off carefully without breaking the plastic clips that hold it in place.
  2. Using a 10mm socket, remove the two bolts that you see which secure the tail light housing.
  3. The tail light housing is also held in place with three or four plastic clips which can be broken rather easily if you don't do this next step carefully. Begin prying the plastic tail light using a plastic putty knife or screwdriver. The top clip comes out pretty easily and so does the bottom one.
  4. On a cold winter day, the middle clip is the one that can break rather easily so gently rock the tail light or wait for warm weather when the plastic isn't brittle.
  5. Once the tail light "bucket" is removed it's a simple matter to replace the bulbs.
d87baef.jpg

Oct 03, 2008 | 2003 Nissan Murano

2 Answers

Tail light removal


You remove the tail light by removing the nuts or bolts from inside the trunk area. This is what holds the tail light in place.

Jul 21, 2008 | 1998 Honda Accord

Tip

How to Remove Tail Lights on a Audi all road Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Audi AllRoad Cars & Trucks

Not finding what you are looking for?
2007 Ford Territory 4.0 Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...