Question about 2004 Ford Ranger

1 Answer

Mapping codes P0107, P2263 & P2227 come up on scan tool what are these codes relating too? Ford Ranger 2008 not 2004 3.0 4 door

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 53,755 Answers

Code p 0107 refers to manifold absolute pressure (MAP) sensor /barometric pressure (BARO) sensor --low input ====causes --wiring short to ground ---MAP sensor ---BARO sensor ---ECM
code p 2263 refers to turbo charger (TC) boost pressure /supercharger (SC) boost pressure ---performance problem====causes --mechanical fault
code p 2227 refers to BARO sensor -range / performance problem===causes wiring --- BARO sensor --- ECM
I would be testing the BARO sensor for a problem as it is listed for all 3 codes
if you don't have such a sensor you have a MAP sensor which is reading in the same area so test that as well

Posted on Oct 19, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi guys ford ranger 2,5 2006 engine light is on DTC P0107 Please help


code p 107 refers to manifold absolute pressure (MAP) sensor / barometric pressure(BARO) sensor --low input===causes ---wiring short to ground---MAP sensor---BARO sensor ---ECM

Apr 05, 2018 | Ford Cars & Trucks

2 Answers

How to remove a p2227 off a 2007 Volvo Xc 90 3.2


code p 2227 refers to Barometric pressure sensor(BARO)---range /performance problem===causes ---wiring---BARO sensor---ECM
to remove the fault , replace the sensor then use a scan tool to reset the ECM

Aug 16, 2017 | Volvo Cars & Trucks

1 Answer

2006 3.0 ford ranger will start and run for a hour, then it will shut down, wait 15 min. it will start up.


Begin with the basics;
First step;Add Scan tool,ck for codes....

If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce

May 19, 2015 | 2006 Ford Ranger 3.0

1 Answer

Emissions light on


Have you hooked it up to a code reader or scan tool to pull codes out? Do that so you have a place to start your diagnose.

Jun 18, 2014 | 2004 Ford Ranger

1 Answer

I have a 2001 ford ranger 2.3L with a dtc 1504 i changed the iac but still have the same code what next?


You DID clear the codes after the repair, I assume. Otherwise the code will still be there. The cheaper code readers do not provide for a reset of the codes. The scan tools do.

Nov 04, 2013 | 2001 Ford Ranger Regular Cab

2 Answers

1998 ford ranger no fuel no spark


1998 ford fanger with no fuel and no spark, a good thing to do would be to have the codes checked, maybe the computer picked up the problem and stored a code, the code would tell you what is failing, but a scan tool would be needed, if you do not have a scan tool then i would start with the coil and then the crank sensor, the most common cause with a problem like this would be the crank sensor, hope this helps.

Mar 13, 2011 | 1998 Ford Ranger

1 Answer

2005 Ford Ranger: OPD Code P0301 Cylinder 1 misfire, how do I fix problem? How do I reset code?


check spark plug,coil,wire,first if all good i would check compression,only way to reset is with a scan tool

Oct 15, 2009 | 2005 Ford Ranger

1 Answer

1992 ford ranger fault code dtc90 I cant find any answer to this code


best way is to go to autozone, they will hook it up to their own obtc scan tool and will print out a listing of the fault with all possibilities.

Sep 21, 2009 | 1992 Ford Ranger

1 Answer

CEL Error Code p2227


P2227 is thrown for barometric pressure circuit range/performance error. I'm researching what causes it since I have the same thing on my turbocharged Accord.

Aug 26, 2008 | 2007 Honda Civic GX NGV Sedan

Not finding what you are looking for?
2004 Ford Ranger Logo

610 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...