Question about Cars & Trucks

1 Answer

What is the best RV wax to use?

What is the RV way you use for your RV with clear coat and decals? Do you use an orbital buffer to polish with and if so what are the suggestions to using this? So far I have heard good products to be 3M marine wax and Protect All. Protect all is a liquid wax, but does not last long and therefore I normally have to wax 3 times a year. An orbital polisher is not required with this liquid wax.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I haven't found anything better than Meguiar's products. When necessary I use their Swirl Remover 2.0 to get rid of swirls, and then NXT Generation Tech Paste Wax 2.0. Each one is applied with an random orbital waxer on the flat panels for an evenly applied coat that can't be achieved by hand. Have been searching on the internet and I found one great review about best RV wax for fiberglass that you should take a look

Posted on Jan 06, 2018

Testimonial: "Thanks. It's really useful information!"

  • Billy Dream
    Billy Dream Jan 18, 2018

    Meguiar is a good choice when it comes to RV wax for fiberglass. I've tested several wax brands and now I only use Meguiar's products for my RV



4 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: Peeling clear coat on black 1999 toyota corolla.

Well it is a common problem with Toyota paint jobs. Unfortunatly a simple wax wont stop this from continuing all though it will hide it from site for a while. The problem has to do with the factory paint job, so a repaint (by Maco or any other botom dollar body shop) will only be a band-aid fix, and will most likely rear it's ugly head somewhere down the line. If you intend to sell the car this may be a way to make it look sharp and easier to sell. **** if you intend to keep it I would not sugest it as you will most definatly be dissapointed as a repaint is only a temporary fix for this issue.

To thoroughly fix this issue you would need to have the car professionally stripped (at least down to the collor coat) and repainted. This will be expensive, and most likely will cost more than it is worth for a car that old. I would start by checking to see if there was a factory recall on the paint for that year, make, and model.

Good Luck!

Posted on Jul 28, 2009

  • 2976 Answers

SOURCE: have a week old car, need to know what type of wax

Don't use ANY polish. If the car is only a week old, the paint is new. Wash it with COLD water only for the first 6 months. DON"T use a carwash. The pressure will ruin the finish. If you have clearcoat, most cars do, use an acrylic wax made for clearcoats.

Posted on Dec 26, 2009

  • 85178 Answers

SOURCE: can you apply and take

You can as long as you use two different pads, you can't use the same pad..

Posted on May 05, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do u clean headlight covers

We use Marine Polish. Use a small drill buffer, polish until clear. Make sure you use polish and not wax.

Aug 23, 2014 | 2003 Ford Focus


How to make your car shine like new again.

Todays car uses a polyurehtane type finishes. Some would have that shiny clear coat on top of the flat color or mixed with color already. Over the years sun would dull away that shiny clear coating making the car look faded out and some sever cases the clear coat is already gone. On most cases an electric buffer and some polishing compound is all that is need to restore the car like new. On severe cases a fine sand paper of 1000 grit or more is needed to sand away the roughness then followed by buffing. If the clear coat is gone completely, you can spray only the bad area with fresh clear coat then buffed after wtih polishing compound after drying completely. Unless you have the knack for spray painting you should not try it. Getting a good result require skills and practice. Besides I do not really recommend spray cans since there are no adjustment you can do except in the way you spray the paint. If you decide to paint it anyways the rule of thumb is do not disturb any part that do not need to be painted and always cover surrounding area with a newspaper using masking tape. Do not rush on the job, and take your time. The technic in spray painting is get the hands moving before you press the spray button, and keep the hand moving as you release it. The distance from the surface should be 6 to 8 inches. Adjust travel speed to get the best result. Spray in layered patern. You should adjust the speed of travel just enough to cover the surface completely without mist but not to much since this will result in "orange peel" appearance or worst a run down and keep a steady pace.. Use a cardboard to practice first. Remember do not disturb any part that can be buffed out. Most faded out surface can be sanded and buffed smooth. If you take your time and do a good job you will be happy to see the fruits of your labor everytime you go outside and see your car. Good luck!

on Sep 14, 2010 | Mazda Protege Cars & Trucks

1 Answer

Remove Spray Paint Over Spray on Vehicle

Could try grim and wax remover/prep for auto bodies. Auto stores have it. Then polish/ wax the spot.

Mar 21, 2014 | 2004 Dodge Ram Pickup 1500

1 Answer

How to prevent paint oxidation crown

Waxing is the best way to prevent surface oxidation. Because the wax to seal effect, form a protective film on the surface of the paint, inhibition of oxidation of harmful components external to the paint. Waxing also be seasonal, summer to use ultraviolet wax.
Processing: processing by grinding and polishing Qimian oxidation. Afterpolishing, the removal of surface oxide layer, allowing the vehicle to one's face glowing with health, color temporarily returned to the state of car.At the same time, can also carry out sealing and coating. The tightness of the sealing can be added to paint, and high temperature resistant andultraviolet. Use obd2 for automotive diagnostics , you can improve vehicle safety performance and driving more safer.

Dec 11, 2013 | Toyota Cars & Trucks

1 Answer

How to best care for car repainted (6 weeks ago) with single-stage enamel (ie. no clear coat)? (Ie. ok to wax, apply protectant, etc?).

if hardener was added it well mixing makes it stronger but rule of thumb is aleast 2 weeks before hand wash 6 months before wax and buff

Oct 31, 2013 | Cars & Trucks

1 Answer

The best way to polihs a car

With an orbital buffer - you won't burn the paint.

else if your good . . . a circular buffer with a wool pad

I use a glazing compound (i.e. black ebony) with a circular buffer
followed by a carnuba polish and a orbital buffer.

Oct 23, 2013 | Cars & Trucks

2 Answers

Someone spraypainted my car how do I remove it?

Depends on the paint.
Most of the time you can use rubbing or polishing compound to "rub" the spray paint off.
As for the sugar, if you have not cranked the engine yet, or turned on the key, you may be able to take the gas tank off and clean it out without having to flush the fuel lines.

Jan 28, 2013 | 2000 Chevrolet S-10

1 Answer

How do I fix paint chips on the hood?

I suggest you keep touching in the spots and building up the level over time until it is slightly proud of the surrounding paintwork. When fully hardened the surface of the spot should be flatted with a small block. I use the end of a short piece of 3/8 or 1/2 inch wooden dowel with a circle of fine abrasive paper glued to it. I sand wet and begin with 600 grit and finish with 1000 or 1200 grit. Once the area is flush it can then be polished with a polishing compound such as farecla and finished with T-cut.
A coat or two of lacquer can be applied or a few coats of hard wax polish.

May 07, 2017 | Toyota RAV4 Cars & Trucks

1 Answer

Can you apply and take off wax with the same orbital polisher?

You can as long as you use two different pads, you can't use the same pad..

May 05, 2011 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22400 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides