Question about Acura Cars & Trucks
Before you pay a shop did you already take it to an Auto Parts and they checked it and said it was gas cap? If not, do so it's Free. If you did then follow Kardocs advice.
Posted on Jul 23, 2019
You have a small pressure leak in the vent system. You may need to take it to a shop and they can do a smoke test to find the leak.
Posted on Jul 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2005 Acura tl brake replacement
The Brembos that come on Type S/Manual models wear fast. I've changed them at 20,000 miles. They are expensive also.
Non-Type S/Manual models I have seen go 80,000 miles. The biggest factor on brake wear is how the vehicle is driven.
At 50,000 miles I would have them inspected. Depending on where you go, make sure you get an accurate measurement of both pads (inboard and outboard). 2mm is the service limit and about that time the indicators start making noise, but not always. Most indepent shops are going to sell you brake pads at 4mm. That's another 10,000 miles at least you could have driven on them.
Never replace just the brake pads, resurface or replace the rotors. The uneven surfaces of the rotor will cause your new pads to wear incorrectly and possibly cause brake noise. Most aftermarket pads will cause a squeel.
Posted on Sep 21, 2008
you may have to reset the engine light. These cars are all computerized. Call the dealership and tell them that you had to replace the gas cap as it was faulty and caused your check engine light to come on. Ask them if they can reset the "computer" or if they can tell you how to do it (if that is possible).
Don't know if that will work, but my dad has been in the car business for over 35 years - I tend to listen to most the things he says......
Posted on Nov 22, 2008
There is no sensor for a loose gas cap. What is happening is that the evaporative emission system is sensing a "Large Leak". Usually code p0455. The computer sees this as the most probable cause is a loose gas cap depending on several factors it looks at. You would need to clear the code(s) and see if that was the problem. If the light comes back on, then you have a problem in the system that will not let it seal. Possible solenoid problem, leaking hose / line, etc.
Posted on May 08, 2009
There are two mechanical noises you will hear from an engine, lifter noise, wrist pin slap, and rod bearing noise. The only one that will go away, if at all, with engine warm-up, is lifter noise. All assuming of course, the noise is coming from the engine, and not any of the externally mounted accessories.
Have the oil changed, and continue to change every 2000-3000 miles with a good quality oil, maybe the lifter will clear itself. If it does, maintain the oil changes for the next few changes to assure it is cleaning out.
You might also try adding 1-2 pints Berrymen's Chemtool to the oil 200-300 miles before you plan to change the oil.
Posted on Dec 13, 2009
Testimonial: "THE ACURA TL 2007 USE HIDRAULIC LIFTERS? WHERE?"
Tips for a great answer:
Sep 23, 2017 | 2012 Chevrolet Chevrolet Impala LTZ
Jan 25, 2014 | 1999 Acura TL
Mar 22, 2011 | 2011 Acura TL
Nov 09, 2010 | Acura RDX Cars & Trucks
Mar 24, 2010 | 2003 Acura 3.2TL
Dec 13, 2009 | 2007 Acura TL Sedan New Cars
Jun 05, 2009 | 2008 Land Rover Range Rover Sport
Dec 29, 2008 | 1999 Acura TL
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: