Question about Ford Cars & Trucks

1 Answer

Where is the warning chime on a 2007 ford explorer

IT QUIT CHIMING FOR SEAT BELT, LOW FUEL, HEADLIGHTS ON ETC

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

Up under the dash, near the steering column; likely disk shape but could be rectangular chip.

Posted on Aug 14, 2019

Testimonial: "thats for earlier model explorer I believe"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I want to get rid of the stupid door chime.

That door chime was driving me crazy too. It turned out to be really easy to pull the power cord from the chime. If you fold down the glove box by pulling the two plugs out from the inside, you can see the chime up behind the dash just to the left of the glove box. Just pull out the cord attached by removing the clip and you are golden.

Ahhhh. Sweet relief. I have been chime free in my accent for 2 months, and it makes for a much more enjoyable car.

Enjoy!

Posted on Jan 13, 2009

  • 13 Answers

SOURCE: How can you turn off the Hyundai Santa Fe 2007 seat belt chime

well you could cut the dinger out.. but I would not recommend doing that. Usually it makes more sense to just wear your seat belt as local laws require

Posted on Apr 12, 2009

adnanbhatti
  • 1188 Answers

SOURCE: Airbag light chiming

Try replacing airbag light fuse. It usu' indicates some damaged wiring if it continues to blink. Also there might be a short in wiring due to water.

Posted on Jul 24, 2009

  • 11 Answers

SOURCE: Disabling seat belt chime in a 2007 Silverado

Unfortunately if you take this to a shop they can get into alot of trouble doing this for you. Some are controlled by the body control module and others are just simple circuits. Look at you seat belt female end and look for a harness that goes to it. If it's just 2 wires connect those two wires together to trick the system! You should always wear your seatbelt by the way.

Posted on Sep 03, 2009

  • 5013 Answers

SOURCE: Ford Mondeo Mk3 Estate 2L. Air bag / seat belt Warning Light

Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Posted on Sep 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do we get a 2006 Uplander to stop chiming?


What is it chiming ? Chimes for different reasons , headlamps on , seat belt not buckled , etc.... What warning light is lit on the instrument cluster ? if any . seat belt , air bag's etc...

Audible Warnings Description and Operation
The audible warnings alert the driver of a system concern or a critical vehicle condition. The following lists the audible warning priority and the pulse rate:
Fast rate chime (200 pulses per minute)
Medium rate chime (150 pulses per minute)
Slow rate chime (50 pulses per minute)
Single chime
Fasten Safety Belt Warning
The inflatable restraint sensing and diagnostic module (SDM) activates the fasten safety belt audible warning for 5-8 seconds. The fasten safety belt warning sounds and the fasten seat belt indicator illuminates when the following occurs:
• The ignition switch is in RUN, BULB TEST, or START position.
• The SDM detects that the driver's seat belt is not buckled (signal is low).
If the seat belt is buckled before the ignition is in RUN, BULB TEST, or START position, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops.
Key-In-Ignition Warning
The instrument panel cluster (IPC) activates the key-in-ignition audible warning. The key-in-ignition warning sounds when the following occurs:
• The ignition switch is in OFF, LOCK, or ACCY position.
• The body control module (BCM) determines that the driver's door is open (signal is low).
• The BCM determines that the key-in-ignition switch is closed (signal is low).
Lights On Warning
The instrument panel cluster (IPC) activates the lights on audible warning. The lights on warning sounds when the following occurs:
• The key is not in the ignition.
• The body control module (BCM) determines that the drivers door is open (signal is low).
• The BCM determines that the headlamp switch is in the park or head position.
Rear Parking Assist
The rear object sensor control module activates the audible warning. The audible warning sounds whenever any of the indicators are illuminated on the rear parking assist display. For a description of the rear parking assist system refer to Object Detection Description and Operation.
Turn Signal Reminder
The instrument panel cluster (IPC) sounds the turn signal reminder once per each flash of the turn signal lamps when:
• The ignition switch is in the RUN position.
• The turn signal switch is in either turn position, sensing, within 1 second, an open to B+ transition in the turn signal control circuit (left or right turn).
• The vehicle has traveled a distance of 1.2 km (0.75 mi) by counting pulses on the vehicle speed input circuit.
The IPC turns off the turn signal reminder when either the ignition switch is turned to the LOCK position or to the OFF position, or the turn signal switch returns to the OFF position, sensing, within 1 second, no transitions from open to B+ in either of the turn signal control circuits (left turn or right turn).
Additional Chimes
The following chimes will turn on when an associated indicator turns on in the instrument panel cluster (IPC):
• Low Fuel Indicator
• Low Oil Pressure Indicator
• OVER SPEED indicator
For a description of an indicator refer to Indicator/Warning Message Description and Operation.
For diagnosis of an indicator refer to Symptoms - Instrument Panel, Gages and Console.

Your have a problem with one of these systems , your best bet , take it to a qualified repair shop. They would do diagnostic's to find the problem .

Do any indicators illuminate when the chime sounds?
Go to Symptoms - Instrument Panel, Gages and Console
Go to Step 3
3
Turn the ignition OFF.
Remove the key from the ignition.
Turn the headlamp switch to OFF.
Close all of the vehicle doors.
Open one or more of the vehicle doors
Does the chime sound at all times regardless if the doors are open or closed?
Go to Step 15
Go to Step 4
4
Close all of the vehicle doors.
With a scan tool, observe the LF Door Ajar Switch parameter and the RF Door Ajar Switch parameter in the instrument panel cluster BCM/Inputs data list.
Do all of the Door Ajar Switch parameters display Door Closed?

With a scan tool, observe the Left Rear Door Ajar Sw. parameter and the Right Rear Door Sw. parameter in the instrument panel cluster BCM/Inputs data list.
Do all of the Rear Door Switch parameters display Closed?

This is a 21 step diagnostic trouble shooting flow chart .

Jul 03, 2018 | Cars & Trucks

1 Answer

I have a 2004 ford explorer when im driving i hear a dinging noise on the passenger side behind dash bords


Could be the seat belt or the door chime.on a timer, probably the seat belt.

Oct 17, 2014 | 2004 Ford Explorer

1 Answer

Disconnect seat belt chime -1999 ford ranger xlt 6cyl.


Follow the chime sound under the dash when it is chiming and pull the plug out of the connector. Wrap black tape around the plug you pulled out

Sep 06, 2013 | Ford F-150 Cars & Trucks

1 Answer

Fuel is to rich, headlight chime


on some vehicles the chime for the headlights is the same as the chime for the doors, if you have your interior light turned off via switch or just a bad door jamb switch then the headlight chime may not work. at least that's why my dodge quit chiming.

Jul 04, 2010 | 2002 Nissan Xterra

2 Answers

While I start driving, the Chime box goes off! Ding Ding Ding Ding...etc..over and over again. How Can I disable the chime box on my 93 Buick Park Avenue?


Is this the warninng that you are not wearing your seat belt? The way to make it stop is to wear your seat belt.

Mar 10, 2010 | 1993 Buick Park Avenue

1 Answer

Drivers side seatbelt connected When truck is


sensor in the seat belt bukle needs to be replaced

Aug 01, 2009 | 2004 Ford F150

2 Answers

Seat belt chimes continue after seat belts are on.


i drove for a whole year with my car chiming finally figured it was a fuse that had blown causing the chiming bell to go on. Check your fuses and youll find one that is blown replace it and you should be fine.

Dec 27, 2008 | 1992 Volvo 960

2 Answers

Arter I put on Seat Belt, another chime goes on for 6 rings,then stops


HI.
ON Ford cars and Suv's,
Some times the sound chime after the seat belt buklet.
Is like a open door.
The problem on this car is that the the DOOR AJAR SWITCH. come danaged. and the Body cumputer don't recievethe door close signal.
But is intermitent.
The door ajar switch is on the door lacth.
You only can get front the dealer.
OK. I hope this information can be useful for you.

Thank you.

Jul 17, 2008 | 2001 Ford Explorer Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...