Question about 2001 BMW 5 Series

Open Question

BMW 5 series 2001. No sound from any left hand side speakers. When i removed the unit I short circuited the signal from right to left and the speakers do work so no broken cables. Turn the unit off and on and there is no sound from left hand side. I have of course checked balance, front and back fade. Any ideas?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

tteamimage

  • 33 Answers

SOURCE: bmw speaker wiring

go buy a wire harness adapter at a car stereo shop it will help a lot

Posted on Sep 27, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: terrible noice when I turn the steering wheel on my 2001 BMW 325i

Make sure you check your power steering fluid... if it's even low, it will make a terrible noise...run it on empty too long and your can ruin your power steering pump.

Posted on Dec 27, 2008

greg benton

  • 231 Answers

SOURCE: radio has no sound or intermittent sound.bmw e39 5 series '00.

You might want to suspect a stereo amplifier. Does your car have DSP? In any case, look in the trunk on the left hand side. You will find your radio amplifier back there. It will have about a 3in connector with a bunch of twisted pair wiring. Remove the connector and make sure there is no water contamination. All sound processing takes place in the amp.

Posted on Mar 09, 2009

Anonymous

  • 1 Answer

SOURCE: How do I remove a front turnng signal bulb on 2002

Take car to dealer and have the bulb replaced

Posted on Jul 10, 2009

Anonymous

  • 1 Answer

SOURCE: the radio on my bmw e46 has topped working and the

did u ever find a solution? running into the exact same problem as we speak! grrr

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2010 cobalt lt. Today both my feont speakers quit working. And now my turn signals make no noise. Or the door chime or the seatbelt indicator does not work. What causes this and how do I fix it?...


The chimes an turn signal noise come out driver door speaker . Both front speakers not working could be a blown circuit fuse inside the radio or just blown front speaker channel . Your best bet , take it to a GM dealer or someother qualified repair shop . You have no idea of the complexity of this . The radio can set DTC'S - diagnostic trouble codes , believe it or not !
DTC B1025, B1035, B1045, or B1055
DTC B1025 01: Audio Output 1 Left Front Circuit Short to Battery
DTC B1025 02: Audio Output 1 Left Front Circuit Short to Ground
DTC B1035 01: Audio Output 2 Right Front Circuit Short to Battery
DTC B1035 02: Audio Output 2 Right Front Circuit Short to Ground
DTC B1045 01: Audio Output 3 Left Rear Circuit Short to Battery
DTC B1045 02: Audio Output 3 Left Rear Circuit Short to Ground
DTC B1055 01: Audio Output 4 Right Rear Circuit Short to Battery
DTC B1055 02: Audio Output 4 Right Rear Circuit Short to Ground

Each of the audio output channel circuits (+) and (-), at the radio and audio amplifier have a DC bias voltage that is one half of the battery voltage. When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone to move and produce sound. This voltage will vary depending on what type of audio is being listened to, talk or music, and type of music, as well as the volume setting of the system. Low volume and talk settings will measure around 1V AC and less, where constant music may measure 3V AC and slightly higher.
DTC B1287 01: Amplifier Control Signal Circuit Short to Battery
DTC B1287 02: Amplifier Control Signal Circuit Short to Ground
DTC B1287 04: Amplifier Control Signal Circuit Open

The radio provides a remote amplifier mute output circuit to control overall muting of the remote amplifier. The amplifier receives pulse width modulated (PWM) signals on the control circuit at varying duty cycle percentages for controlling muted and unmuted functions of the amplifier. Circuitry internal to the radio monitors the remote amplifier mute circuit for faults and sets the appropriate DTC when faults are detected.

Feb 16, 2018 | 2010 Chevrolet Cobalt

2 Answers

2002 bmw 530 I oil pump located


Your oil pump is located inside the oil pan but is part of the chain assembly. The first picture is with the oil pan removed and the engine upside down (the red arrow) the second is right side up red arrow pointing to the oil pump. That gear with the chain on it is left handed thread when removing and installing. Hope this helps....

10_28_2012_5_46_56_pm.jpg10_28_2012_5_47_12_pm.jpg

Oct 28, 2012 | 2002 BMW 5 Series

1 Answer

I need a honda car code , i can't turn on my radio


service manual.
Code Description Possible Cause
0 ECU / ECU signal No signal to ECU
1 Oxygen sensor circuit Oxygen sensor or circuit, ECU
2 Oxygen sensor circuit Oxygen sensor or circuit, ECU
3 MAP sensor circuit Map sensor circuit
4 CKP sensor / engine speed (RPM) Crank angle sensor or circuit, ECU
sensor
5 MAP sensor circuit MAP sensor or circuit, mechanical
problem
6 ECT sensor circuit ECT sensor or circuit, automatic
transaxle control unit
7 TPS / Angle Sensor TPS sensor or circuit, automatic
transaxle control unit
8 CKP sensor / engine speed (RPM) Crank angle sensor or circuit, ECU
sensor
9 CMP sensor CMP sensor or circuit
10 IAT sensor IAT sensor or circuit
11 Idle Mixture Adjuster Sensor Idle mixture adjuster sensor or
circuit
12 EGR system fault No EGR action, faulty EGR valve
13 BARO sensor circuit BARO sensor or circuit
14 Idle Air Control valve circuit / ECU Open or shorted out ignition signal
circuit / No signal to ECU
15 Ignition Output signal Open or shorted ignition output
signal circuit
16 Fuel Injector Circuit Open or shorted fuel injector
circuit
17 VSS circuit VSS sensor or circuit
18 Ignition Timing Adjuster Open or shorted signal circuit
19 A/T Lock-up control solenoid Open or shorted signal circuit,
Lock-up control solenoid lock-up solenoid
20 Electrical Load Detector / Sensor Electrical load detector or circuit
Honda/Acura
Fault Code Definitions (21 - 59)
Chapter 3 22
Code Description Possible Cause
21 Spool Solenoid Valve Open or shorted signal circuit,
spool solenoid valve
22 Valve Timing Electronic Oil Open or shorted signal circuit,
pressure switch valve timing oil pressure switch
23 Knock sensor circuit Knock sensor or circuit
30 AT / ECU communication signal A AT control unit, ECU
31 AT / ECU communication signal B AT control unit, ECU
35 Traction control / ECU / signal Traction control module, ECU
36 Traction control / ECU / signal Traction control module, ECU
41 Oxygen sensor heater - left side Oxygen sensor / heater or circuit
42 Oxygen sensor heater - right side Oxygen sensor / heater or circuit
43 Fuel Supply system - left side Oxygen sensor or circuit, fuel
system
44 Fuel Supply system - right side Oxygen sensor or circuit, fuel
system
45 Fuel metering - left side Injector control circuit, incorrect
fuel metering
46 Fuel metering - right side Injector control circuit, incorrect
fuel metering
48 Heated oxygen sensor Oxygen sensor or circuit
53 Right Knock Sensor Right knock sensor or circuit
54 CKP sensor 2 CKP sensor 2 or circuit
59 CMP sensor 2 CMP sensor 2 or circuit

Dec 28, 2010 | 1994 Honda Accord

1 Answer

Where is fuse for front lighter on a bmw 5251 2001?


In rear right hand side of luggage compartment behind trim panel,fuse number f-52.

Feb 02, 2010 | 2001 BMW 5 Series

1 Answer

Bmw 328 coupe number plate light only one works but if i change the units to the side that works both work but the right side don't work whats wrong! on the right side i tested the power and it rads 1.1 on...


It sure sounds like there is a break in the circuit to the right hand bulb. See if you can follow the actual wire back to where it goes into the loom. Possibly a push fit plug loose or out.

Oct 06, 2009 | 1999 BMW 318 ti

1 Answer

The turn signals , displays on radio unit will not work completly


this is a short circuit on the bus network.
1- i would examine the exterior temperature sensor and that the two wires are not in contact.
2- on the rear right side of the trunk there is a white socket, make sure it has no water ingression in it.
3- take out the A/C head unit and try if things works.
4- Remove the instrument cluster and unplug its sockets and all should be working.

from the above we can detect what is causing this

Apr 22, 2009 | 2001 BMW 5 Series

1 Answer

Bad gas in BMWX5


hello Idmathes, the best way is to remove the fuel sending units on the left and right sides so that you don't run anymore fuel through the system. the bad part of removing the sending units is that they have a specific installation angle. does the fuel just have water in it, or is it contaminated with dirt or something else? any foreign matter can damage the pump or injectors, and water can cause pump seizure. I would recommend removing the fuel with a suction pump and replacing the fuel filter after refilling your tank.

Apr 08, 2009 | 2001 BMW 5 Series

1 Answer

I need to know how to take the indash cd player out of a 2001 530I bmw


1- remove right wood finisher (just pull out)
2- remove the top left finisher (just above the key)
3- unfasten left and right screws of the frame and with a screwdriver pull the lever and so you can take out the finisher.
4- unfasten the 4 screws holding the player and so you can get it out.

Mar 24, 2009 | 2001 BMW 5 Series

1 Answer

Radio has no sound or intermittent sound.bmw e39 5 series '00.


You might want to suspect a stereo amplifier. Does your car have DSP? In any case, look in the trunk on the left hand side. You will find your radio amplifier back there. It will have about a 3in connector with a bunch of twisted pair wiring. Remove the connector and make sure there is no water contamination. All sound processing takes place in the amp.

Feb 27, 2009 | 2001 BMW 5 Series

3 Answers

Radio has no sound


Hello, I've the same problem... however my sound is likely there when I restart the X5 after an hour or so, but it is as likely to disappear during the minutes that follow, often when the car is shaken.

There is then a fair chance to get sound back as soon I drop the phone after a phone call (but it does not always work).

--> My guess is that it is the line of the Phone "mute" signal that brings every sound source down thru a bad contact or so.

BMW wanted to replace the radio for 900 €. Hmm a lot of money for a bad conatct if my guess is right.

Gary

Jun 14, 2008 | 2001 BMW 5 Series

Not finding what you are looking for?
2001 BMW 5 Series Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

70 Answers

Doberman

Level 2 Expert

261 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...