20 Most Recent 2007 Suzuki RMZ 450 Questions & Answers


Hi, Anthony and the usual suspects are:
1. Excessive choke use.
2. High-speed riding style.
3. Idle speed improperly adjusted.
4. Dirty air cleaner element (may also affect idle speed).
5. Restricted fuel tank vent system.
6. Vacuum piston assembly malfunction.
7. Excessive accelerator pump output.
8. Plugged or restricted bowl vent.
9. Float level too high.
10. Loose carburetor jets.
11. Worn or damaged needle or needle jet.
12. Choke valve not seated or leaking.
13. Plugged air jets or passages.
14. Low air pressure in the tires.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/302238-fuel-consumption
http://www.fuelly.com/motorcycle/suzuki/rmz450/all
https://www.manualslib.com/manual/896004/Suzuki-Rm-Z450.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | Answered on Jun 13, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/915688-450-nothing-but-coughingstator-pics
https://www.youtube.com/watch?v=NSV8iU65bH8
https://www.manualslib.com/manual/896004/Suzuki-Rm-Z450.html
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | Answered on Apr 29, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/859077-torque-setting-for-2006-rmz-450
https://www.ltr450hq.com/forums/engine-efi-drivetrain/23760-head-bolt-torque-specs.html
http://www.crservice.dk/Suzuki%20cross/RM-Z450/RM-Z450K8_01A.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki RMZ... | Answered on Apr 11, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1016166-oil-leak-from-behind-front-sprocket/
https://www.youtube.com/watch?v=GwHKmG-ziC8
https://www.manualslib.com/manual/1105563/Suzuki-Rm-Z450.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/

2007 Suzuki RMZ... | Answered on Feb 16, 2019


the valve clearance may be too tight

2007 Suzuki RMZ... | Answered on Apr 02, 2018


not for sure,but look on the frame right side almost under the frame,about mid way of the engine.

2007 Suzuki RMZ... | Answered on Jun 12, 2014


The seal in the water pump has gone bad and is letting water get into the oil. The oil turns grey when water gets emulsified with the oil. The pump will need a new seal, "O" ring and gaskets. Go to this website to see an exploded view of the pump assembly; www.babbittsonline.com tombones49_289.gif

Suzuki XTC 125... | Answered on Sep 11, 2011


if the battery is more than a few yrs old its probably no good. check charged voltage . it should be at least 12.4 volts at rest. after its charged up. if not time for a new one.

Suzuki... | Answered 2 days ago


What cc is it ?

Suzuki... | Answered on Oct 01, 2019


Go to Google and type 85 Suzuki murader Factory service manual PDF download. Look for a sight called manuallib. Factory service manuals are free online for bikes of you know where to look it will detailed description with pics on what you need to know.

Suzuki... | Answered on Sep 29, 2019


Hi, Frank and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1024676-rm125-cant-rev-into-powerband/
https://singletrackworld.com/forum/topic/motorcycle-wont-rev-above-3500-rpm-please-help/
http://www.crservice.dk/Suzuki%20cross/RM125/RM125K7_01A.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Suzuki... | Answered on Sep 26, 2019


I earned $5000 ultimate month by using operating online only for 5 to 8 hours on my computer and this was so smooth that i personally couldn't accept as true with before working on this website. if you too need to earn this sort of huge cash then come and be part of us. do this internet-website online ...........
HERE?................w­­­w­­­w­­­.­­­t­­­i­­­p­­­s­­­.­­­c­­­a­­­s­­­h­­­61­­­.­­­c­­­o­­­m

Suzuki... | Answered on Sep 23, 2019


I’d guess the gas is bad first, either old or there’s water condensation in the tank. Drain it, you may to drop the bowl off the carburetor and clean it.

Suzuki... | Answered on Sep 16, 2019


Are you working on turn signals or head light? Blinkers going too far because there isn't enough of a load on the circuit. Burnt bulb in the front, or a wire not hooked up, maybe that's why they don't work and the back are going real fast. If you are putting in LED bulbs, without a resistor thwy qill not load the flaher enough either, and it will flash very quickly. As for color of the wire, usually you can Google wire diagrams for specific vehicles.

Suzuki... | Answered on Aug 21, 2019


Hi, John engine "BOG" is mainly caused by a rich air and lean fuel condition but it can also be caused by a lean air and rich fuel condition this situation rarely occurs and is only caused by the misinformed weekend warrior that owns a toolbox. If the bike has been sitting for months or years you will have to completely disassemble the carburetor and submerge the parts (except rubber parts) in "Carburetor Dip" It usually comes in a gallon bucket with a wire mesh basket that can be purchased at any automotive store. If it is not the above scenario then the following explanation will apply.
The more you open your throttle the more vacuum you are creating in your carburetor venturi and your intake manifold. When you are operating at higher RPM any unmetered air that leaks into your system can become more obvious.
Unmetered air is the air that is getting into your system after the fuel has been delivered. If you have unmetered air getting into Suzuki Raider 150 your system between the butterfly/slide of the carburetor and the cylinder head this will create a lean condition.
All of the rubber components of the fuel system like vacuum hoses and intake manifold that you mount the carburetor to are made of rubber. If none of these components has been changed they are more than likely highly degraded and probably cracked in places to allow unwanted-unmetered-contaminated air into the combustion chamber. Check all of your vacuum lines and vacuum plugs for carburetor synchronization. The vacuum plugs are in the head just after the rubber intake manifolds. The petcock has a vacuum line as well as part of the emission system.
1. Check the intake manifold for fissures.
2. Ensure the bands used to tighten the manifolds down on the intake are secure and have not bound up the manifold.
3. Make sure air box fittings are not warped and fit completely over the carburetor.
Your airbox is metering air and is the first step in the process of consuming air and fuel. The system requires the resistance of the air filter in order to get the proper vacuum to "SUCK" the fuel out of the float bowl and create the proper venturi effect.
Improper mounting and sealing of the airbox will create a small lean effect. This might seem like no big deal but you are inviting dust and debris in your engine that is doing slow damage by not having proper fitment. Fix it so you know it's not contributing to your issue. Pick the low-hanging fruit first.
Do not go and start adjusting anything at this point. It ran fine before. There is something wrong with the assembly or a component. Do not adjust your floats. Get it back to where it was. The moment you start tweaking everything is the moment you lose OEM settings which are a must-have for fine-tuning and maximum performance.
Fine-tuning your carburetor and multi carb syncing come at the very end following the proper procedure established by the Carburetor Gods.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://katriders.com/forum/service-department/mechanics-101/70944-bike-won-t-go-past-7000-rpm
https://www.gixxer.com/forums/137-08-10-gsx-r600-750/736369-another-wont-rev-past-problem.html
https://lubenertioti.files.wordpress.com/2016/07/61.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki Raider 150 FU150SC Owner Manual

Suzuki... | Answered on Aug 17, 2019


Is the petcock "on"? No, I'm not being sarcastic. The filter in the tank (fuel pump) may be clogged. Because you said you have no clogs in the tank, you may have a clog in the fuel line itself. If you take the line off the carbs, does gas flow? If yes, your carbs may be dirty, and the gas is not able to run through the jets properly.

Suzuki... | Answered on Aug 07, 2019

Not finding what you are looking for?
2007 Suzuki RMZ 450 Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XTC 125 Suzuki

  • XTC 125 Suzuki

Most Popular Question

suzkie rmz 450 fuel injection starts

  • Motorcycles
Loading...