Question about 2006 Husaberg Fe 650 e

1 Answer

Neutral light 2006 Husaberg Fe 650 e

Add a neutral gear indicator light @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husaberg Master
  • 58,737 Answers

Hi, Anonymous and the usual suspects are:
1. Neutral light bulb burnt out.
2. Faulty neutral switch.
3. A loose bulb in the socket.
4. Faulty wiring from the neutral switch to the light.
5. If the neutral light stays on while the bike is in gear the wire from the light to the neutral switch is grounded.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Neutral+light+2006+Husaberg+Fe+650+e&tbm=isch&source=univ&sa=X&ved=2ahUKEwiMqbDUjObiAhVFmVkKHayNA3AQsAR6BAgGEAE&biw=1440&bih=757
https://www.dirtrider.com/tests/141_0610_2006_husaberg_fe650e
http://www.husaberg.no/Teknisk%20data%20Husaberg/Verkstedhandboker/RA_Husaberg_2005_E_05.pdf
http://www.cyclebuy.com/husaberg/parts.htm
Husaberg 400 User Manual

Posted on Jun 13, 2019

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
goofduck

Jeff Adkisson

  • 490 Answers

SOURCE: i need 2001 husaberg fe 400 plastics

dennis kirk

Posted on Apr 21, 2009

bozcro

bozcro

  • 867 Answers

SOURCE: horn and indicators work when the ignition is off

depending on which countries standards it was built to, yes. permanent feed to them causes no harm.

Posted on Sep 08, 2009

Testimonial: "the only problem i have is pricks turning indicators on in carparks...will have to fit an additional switch. great help though. thanx"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FE 390. Bike will not go into neutral with engine running. How to fix?


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day. DOWNLOAD 2010 Husaberg Fe 390

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 24, 2015 | 2010 Husaberg FE 390

1 Answer

2013 Husaberg 350 Enduro how to adjust the timing


Hi, Barry it's nonadjustable for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.topspeed.com/motorcycles/motorcycle-reviews/husaberg/2013-husaberg-fe-350-ar148843.html
KTM 350 Valve Adjustment And Camshaft Swap
http://www.datamanagement-le-blog.com/fe350_service_manual_download.pdf
https://www.rockymountainatvmc.com/Parts-Finder/11057/2013-HUSABERG-FE-350
https://paitandacent.files.wordpress.com/2015/08/husaberg-fe-350-owners-manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 07, 2015 | Husaberg Fe 400 E Motorcycles

1 Answer

2003 Husaberg Fe 650 e no spark


Hi, Lance and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2003 FS 650 No spark Husaberg Forum
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://www.husaberg.no/Teknisk%20data%20Husaberg/Delekataloger/Firetakt/2000-2008/2003parts.pdf
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 06, 2018 | 2003 Husaberg Fe 650 e

1 Answer

I was fitting a after market tail light the other nite and had the engine running as to have power to identife wich wire did what (testing with a multi meter) and the engine stoped as if it was switched...


Hi, Jonti16 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables shorting or leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
No spark AGAIN
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%20Repmanual%20-05.pdf
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%202001-2002%20SPARE%20PARTS%20MANUAL.pdf
Husaberg 400 User Manual
HUSABERG FE 450 EU Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 16, 2017 | 2002 Husaberg Fe 501 E

2 Answers

Horn and indicators work when the ignition is off


depending on which countries standards it was built to, yes. permanent feed to them causes no harm.

Sep 08, 2009 | 2005 Husaberg FS 450 c

1 Answer

Husaberg 600 wont start on the kick


How much do you weigh? If you have strong compression, that's what you want.

Aug 06, 2009 | 2000 Husaberg Fe 600 E SM

1 Answer

Backfire


Backfires are when fuel travels through the cylinders without combusting then explodes in the exhaust pipe. Fuel supply/combustion issue. It seems likely there's a problem either with the mix going into the cylinders (carbs fuel lines or air intake), or with timing. These can affect a bike at particular speeds and throttle positions. If using the choke has helped at some point that's a further indication (the choke changes the gas/air mix). ,,,

Nov 10, 2008 | 2004 Husaberg Fe 650 e

1 Answer

Clutch


you need a micrometere or vernier caliper to measure how thick they are that how you tell how worn the clutch is. the manual will list the specificational limit (how thin you should allow them to get and how do the basket and innser hub looks like). if they have small teeth on them they are worn.,

Nov 10, 2008 | 2006 Husaberg Fe 650 e

Not finding what you are looking for?
2006 Husaberg Fe 650 e Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...