Question about 2006 Husaberg FE 550 e

1 Answer

Valve clearance 2006 Husaberg FE 550 e

Check the valve clearance @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husaberg Master
  • 58,763 Answers

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/mechanical/21372-fe550-valve-clearance-spec.html
https://www.youtube.com/watch?v=TnKYEbRzKic
http://www.husaberg.no/Teknisk%20data%20Husaberg/Verkstedhandboker/RA_Husaberg_2005_E_05.pdf
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/640214/Husaberg-05.html

Posted on Jun 13, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
goofduck

Jeff Adkisson

  • 490 Answers

SOURCE: i need 2001 husaberg fe 400 plastics

dennis kirk

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1980 Suzuki GS 550 L valve clearance


Hi, Michael for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki GS Engines Checking Valve Clearances
Cafe Racer Build 27 Suzuki GS550 Changing valve shims
Suzuki GS550 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/GS450GA_Owners_Manual.pdf

Jul 01, 2018 | 1980 Suzuki Gs 550 L

1 Answer

How to start a 2003 fe 550 husaberg


Have a well charged battery.Check and see if you are getting a spark a plugs.Be sure you are gettin gas to carb or throttle body.It takes fuel and spark to make a engine run.

Apr 11, 2016 | Cars & Trucks

1 Answer

I have a 2013 Husaberg fe 350. After a top end rebuild the bike wont rev properly, is there a limp mode on these bikes and if so how do we clear it


Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 11, 2015 | Husaberg Motorcycles

1 Answer

2013 Husaberg 350 Enduro how to adjust the timing


Hi, Barry it's nonadjustable for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.topspeed.com/motorcycles/motorcycle-reviews/husaberg/2013-husaberg-fe-350-ar148843.html
KTM 350 Valve Adjustment And Camshaft Swap
http://www.datamanagement-le-blog.com/fe350_service_manual_download.pdf
https://www.rockymountainatvmc.com/Parts-Finder/11057/2013-HUSABERG-FE-350
https://paitandacent.files.wordpress.com/2015/08/husaberg-fe-350-owners-manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 07, 2015 | Husaberg Fe 400 E Motorcycles

1 Answer

2003 Husaberg Fe 650 e no spark


Hi, Lance and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2003 FS 650 No spark Husaberg Forum
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://www.husaberg.no/Teknisk%20data%20Husaberg/Delekataloger/Firetakt/2000-2008/2003parts.pdf
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 06, 2018 | 2003 Husaberg Fe 650 e

1 Answer

1998 Husaberg FE400E hard to start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Starting problem Husaberg FE400 03
2003 fe400e starting problems
http://www.husaberg.no/Teknisk%20data%20Husaberg/Verkstedhandboker/RA_Husaberg_2005_E_05.pdf
Husaberg Parts Dirt Bike Motocross
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 15, 2017 | 2000 Husaberg Fe 400

2 Answers

What are the valve clearance specs for a 1996 Toyota T100 v6?


you should get haynes auto repair manul for your particular car that way you will have the correct information about that. you can get the manul at autozone or any autopart, all you need is your car info, to pick the right manual for your car, good luck

Jul 15, 2011 | Toyota T100 Cars & Trucks

1 Answer

Spongy feeling brakes


yes i would bleed brakes , and check and make sure that no grease or oil got on brake pad's. let us know how it works out . Thank you fore using fix ya.

Apr 10, 2010 | 2007 Husaberg FE 550 e

1 Answer

Hi i was ridiny my husaberg and it just stopped i have a spark petrol gettin threw tryed easy start and still nothing wot could be my problem


3 things needed to start a engine fire, fuel and air, so you have 2 of the 3 i would look at air line on carbs any splits on carb vaccum lines ect. hope this helps

Nov 10, 2009 | 2004 Husaberg FE 550 e

Not finding what you are looking for?
2006 Husaberg FE 550 e Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...