Question about 2002 Kymco Stryker 125
Kymco 125 how do I fit new steering locks and barrel @
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Motorcycle Repair How Motorcycle Lock Works
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO Stryker 125 User Manual
Posted on Jul 13, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it is better to buy a new ignition barrel.it takes a special socket to get the screws out, once the screws are out they do not need to be replaced.buy new barrel,disconnect negative battery cable,disconnect wires from barrel assembly, remove barrel from colum. first take vin# to dealership parts department to get correct barrel assembly, the keys with new assembly will fit doors and trunk
Posted on May 20, 2009
I had this exact same problem on a hipster 125, it was a faulty regulator module ( mounted under the seat) I also found a short circuit (somewhere) in the wiring loom between the regulator output and the chassis (probably what killed the regulator in the first place!) I cut and replaced the entire wire to save removing most of the loom and after testing reg to ensure it was dead i fitted a new one (about £60) bike charges and runs like a dream now even with fully lights approx 80% of the time. good luck
Posted on Jul 23, 2009
SOURCE: Program new key
do u meen the code key you can swap chips over just put a needle through the tiny hole in the swing out chip holder u will no wot i meen my frend gd luck
Posted on Apr 16, 2010
I know this response is a little late. However if anyone has Vespa or piaggio lock problems, i would be happy to help. I am a locksmith with a passion for Vespas. I work, cut keys and rekey piaggio locks daily.
Posted on Jan 16, 2011
Bang a screw into the key lock with a claw hammer an then use the claw to pull the screw out with the barrel on the end of it
Posted on Jul 13, 2011
Tips for a great answer:
Oct 24, 2017 | 2013 Kymco Agility 125
Oct 11, 2016 | Kymco Motorcycles
Jan 28, 2010 | 2001 Kymco Stryker 125
Oct 03, 2009 | 2001 Kymco Stryker 125
Feb 18, 2009 | 2005 Kymco Stryker 125
Jul 17, 2019 | Motorcycles
Jul 17, 2019 | Motorcycles
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: