1991 Chevrolet S-10 "wd 40 ignition lock cylinder" Questions

Ad

...wd 40 or graphite into the switch. Also, if steering wheel is turned fully in either direction, then your steering wheel lock may be preventing you from truning key. Try shaking the wheel while ...

Ad

to me. A can of wd 40 and paper towels, Dirt was the problem with the lock assembly. Squirt the wd 40 into the lock cylinder and insert the key, repeat until it works. ( this trick was from the dealer

Ad

...will my key not go into the ignition of my corsa. It is as if it is closed Try spraying some WD-40 into the lock cylinder and working the key in and out. Otherwise could be a defective lock

...any oil or things like WD 40, it will make the issue worse. U can buy this lock cylinder lube from any hardware or parts store.If this doesn't fix the problem u will need to replace the lock

...WD-40 the lock cylinder, Put the key in the ignition. Rap(Hard) on the back of the key while try to turn key. If it turns leave it in the ON(not run)and I'll tell you how to remove the cylinder.(If ...

Question about Chevrolet S 10

1 Answer

...wd-40 into it -- this usually frees it. You can also move the steering wheel back and forth while wiggling the key -- sometimes the steering wheel lock binds the key cylinder. If this works, you can ...

...wd 40 and try wiggling the steering wheel as i turn the key. I have to perform this step many times before i get it to turn over. I believe the ignition switch is bad or going bad. It's not the ...

Question about Chevrolet S 10

1 Answer

... Make sure the steering wheel is not hard locked while turning the ignition. Try gently moving the steering wheel while trying to turn the ignition. Sometimes a spray of wd-40 in the cylinder will ...

wd-40 and a light bit in key hole and try key again, If key is heavily worn out , try a different ignition key as it might not be disengaging all the tumblers in lock, if all this fails you need a new

Question about Chevrolet S 10

1 Answer

...WD-40 around the button already.This part was changed already when the car was 2years old. I am not entirely certain I understand what button you are describing. However I think you are talking about ...

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

690 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...