1998 Jeep Grand Cherokee "assembly change headlight" Questions

Ad

change a headlight assembly Jeep Grand Cherokee How to change the headlight assemblies Jeep Grand Cherokee 1998 Left and Right Just need take off the screws; for details check the graphics and ...

Ad

...change the bulb and leave the socket, but I could not get the bulb loose. Part 9006XS is a bulb and socket together. Mine cost about $12 dollars. As far as I'm concerned it is worth it. For this task ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...to change blub. The whole head lamp assembly has to come out to replace the headlight bulb. Here's how to do it. Here is a link to instructions ...

Question about Jeep Grand Cherokee

1 Answer

...change out the headlight assembly Instructions in owners manual. Undo long bolt top/centre of headlight and remove. Then grab hold of headlight and pull out horizontally. Very tight. Held by four (4) ...

assembly is dirty and need to take it off to clean it.I know how to change the bulbs but not how to take off the outer plastic cover the outer shell is not separable from the housing. you will have to

...change the headlight out in a 2003 grand cherokee drivers side low beam very easy open hood look for bolt above light remove and pull assembly straight out you may have to pull a little but it will ...

...change the headlight bulb in a 2002 Jeep Grand Cherokee? For bulb replacement: 1. Disconnect negative side of battery. 2. Open hood. 3. Reach behind the neadlight assembly and disconnect the wiring ...

Question about Jeep Grand Cherokee

1 Answer

...assembly to change the turn signal bulb. There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light ...

Question about Jeep Grand Cherokee

1 Answer

...i can see some melted plastic inside the asssembly. How do I remove the assembly to repair the melted plastic issue? it is to melted?change the headliht,try it whit a file to remake the

...assembly as if you were going to change a bulb.3) Turn the socket and remove it from the taillight assembly and set it aside(check to be sure your bulb is not burnt out). overcome by this, Now ...

Not finding what you are looking for?
1998 Jeep Grand Cherokee Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...