Question about Hoover Washing Machines
Hoping to be of help after the spin dry wouldnt work on our hoover elite 1210.
It would do the wash cycle fine but as soon as it needed to drain, it wouldn't.
My handy man (Husband) is great at fixing things and opened the front panel by undoing the screws.
Near the motor on the bottom left, there is a wheel/fan looking thing.
(Turn the machine off first)
He tried to spin the wheel but it would only move clockwise and not anti-clockwise like it is supposed to.
So he gave the fan a few spins clockwise before giving it a gentle pull outwards in which it loosened the wheel and was able to move anticlockwise again.
We then turned the machine on and it started spinning and draining the machine.
This machine is a work horse and I refuse to get another. They don't make them like they used to!!
Mine has a leak and we use a drip tray underneath at the moment. So long as it works. I am happy.
Hope this helps someone else with the same problem.
Posted on Jan 09, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i think you will find the carbon brushes r worn out they r mounted on the side of the motor held on by 2 5.5mm nuts or 2 screws 1 brush on each side of the motor switch off at the mains b4 you start work good luck
Posted on Aug 19, 2007
SOURCE: Bad vibration during spin
Good morning! It's common to a washing machine to go out of balance everytime we exceeded the prescribed capacity load (as indicated in the enclosed manual upon purchase of the unit). the fitted new pump is not the source of such problem. Please try to review the manual of your machine and take note of the required capacity load which I think should not exceed 6kg. Best regards.
Posted on May 02, 2009
Hi just read your posting. Now what wash temperature have you selected for the wash ?Is it cold , warm, or hot?Does it start to fill at all for the wash cycle?I have the same model at home so I know the model well.If it fills and does not wash it could be the timer or the reversing module. please reply and I can guide you throe step by step to rectify this fault.By the way does it finish filling on wash and not start the motor at all?Hope this helps, awaiting on your response.
Posted on Jun 05, 2010
Could be bearings or more likely the concrete weight at the bottom of the drum is loos give it a shake from under to check...Good luck
Posted on Feb 09, 2011
Tips for a great answer:
Jul 06, 2012 | Washing Machines
Nov 03, 2011 | Hoover Washing Machines
Feb 09, 2011 | Hoover Washing Machines
Nov 21, 2009 | Hoover Elite Rewind Bagless Upright...
Oct 19, 2009 | Hoover HTC243 Top Load Washer
Aug 03, 2008 | Kenmore Elite HE4 Electric Dryer
May 20, 2007 | Hoover HTC243 Top Load Washer
201 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: