Question about Mitsubishi WS-65809 65" Rear Projection Television
I have same problem as another member, tv turns right off seconds after turning it on, green timer light comes on and goes off, no picture comes on or sound, just a little power zapping sound every time. it worked fine last night!!
Check 2 5amp chem fuses. in middle of tv. yellow or orange in color . if bad replace the 2 stk convergence ics and fuses.
Posted on Apr 05, 2007
There is a resistor by the high voltage transformer,it has low value and it opens for no reason,he is likely open and does not let the set stay on,if you are familiar with tv service you can replace it and while you are down there check for any over heated areas and resolder them specially the convergence IC.This resistor is located in the back edge of the chassis in the board in the right side and it might be hidden by a plastic casing that covers the high voltage transformer.If you are not too familiar with tv service you should seek the help of a servicer.Let Us know how it goes or if you need more information.
Posted on Nov 06, 2006
HELLO NEW TO PROGRAM.I HAVE A MITSUBISHI WS-65517 HAVD SAME PROBLEM WITH FLASHING GREEN LIGHT READ A LOT OF POSSIBLE FIX I LOOK AT CAP DIDN'T LOOK BAD BUT REPLACE THEM ANYWAY DID NOT FIX, REPLACED POWER BOARD DID NOT FIX, RERPLACED DEFLECTION BOARD DID NOT FIX,CALLED MITSUBISHI TO GET A REPAIR GUY,HE CAME OUT LOOK AT SET DIDN,T EVEN TAKE OFF BACK COVER GAVE GOOD ADVICE. HE SAID START ON DM3 BOARD THERE IS A SMALL BOARD ON DM BOARD IT IS CALLED E2P BOARD.IT COST ABOUT 100.DOLLARS. I REPLACED IT, PLUG IN,GREEN LIGHT FLASED ABOUT A MINUTE,THEN REMARKABLE SOLID GREEN LIGHT YEA,SET WORKING GREAT.HOPE THIS HELP.
Posted on Feb 11, 2008
I had the same prob w/ my Mits 65 rear proj. Refused to turn on, light only blinked. Was able to correct for free. Opened access panel & noticed wood holding 3 main lenses (Red,Green,Blue) was loose/warping. Tight'nd everything up with a phillips. Problem solved and picture is better than ever. While at it I dusted off interior. Check your tv b4 calling someone. Sometimes the solution is simple.
Posted on Jun 18, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
check the collector drop on Q29a002. If it is less than 16 nano amps, repl ic u12 in conver circuit. stk392-570 and pico fuses f04 and f05 24v circ
Posted on Jan 14, 2009
Tips for a great answer:
Feb 03, 2011 | Mitsubishi WS-65809 65" Rear Projection...
Dec 10, 2010 | Mitsubishi WS-65809 65" Rear Projection...
Oct 04, 2009 | Mitsubishi WS-65809 65" Rear Projection...
Jul 09, 2009 | Mitsubishi WS-65809 65" Rear Projection...
Feb 08, 2009 | Mitsubishi WS-65809 65" Rear Projection...
Jan 21, 2009 | Mitsubishi WS-65809 65" Rear Projection...
10,268 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: