Question about Toshiba Copier Gm 2040 Print Scan Enabler E Studio 520 600 720 850 Printer

2 Answers

F101 Error Toshiba estudio2040c

What does F101 Error code mean and how can we fix it? We had error code F510 a couple of weeks ago and the service repair person replaced the entire hard drive.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Hey guys.. pls.. anyone know where can i download thw firmware for Toshiba estudio 4555c?

Posted on Apr 29, 2019

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 109 Answers

F101-4: Partition mount error (The HDD cannot be connected (mounted) caused by damage to the "/work" partition.)

1. Turn the power of the equipment OFF and check the connection of the HDD.
- Connector and harness check
- Check if the connector pins of the HDD are bent.
- Check if HDD for other equipment is not installed.
- Check if SRAM for other equipment is not installed.

2. If the error still occurs after step 1, perform the following.
- Perform [3C] - [5] (Key Backup Restore) and check that each Key Status is "OK".
- If not, recover the key (copy "SRAM Key Status" to "FROM Key Status" or vice versa).

3. If the error persists after step 2, perform
[5]+[C]+[POWER]?2. Recovery F/S?3. /work, and then restart the equipment.

4. If the error persists after step 3, perform
[5]+[C]+[POWER]?3. Initialize HDD?2. /work, and then restart the equipment.

5. If the error still persists after step 4, perform the following.
- Perform [3C] - [3] (Format HDD), and then install "System Software (HD data)" with [49] - [4].

Notes:
The following items will be deleted by performing [3C] - [3] (Format HDD).
• Message Log
• Job Log
• Spool Data (Print, Email reception)
• Template
If the error persists after performing step 5, perform step 5 after performing [4]+[C]+[POWER]?1. Revert factory initial status HDD.

6. If the error persists even after step 5, replace the HDD.

Posted on Apr 29, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Hard Drive error No. F105

F105 is "other HDD error" . Start the copier holding 0 and 8, it goes in a test mode, then punch 690 and presss start key. Restart the copier. If does not work you might have to replace the HDD and reinstall the firmware. Let me know.

Posted on Feb 01, 2008

  • 990 Answers

SOURCE: I have a Toshiba E-studio 650 with a C46 error code.

Hello sir; The error code you post out it's means "fuser pressure roller thermistor bad let's try to reset if don't work have to replace it;
Turn power off , press and hold down 0 and 8 while turn on the power, enter 400, press start,enter 3 ,press start, enter 0 press set or interupty. turn power off and back on again.

Posted on Jan 10, 2009

  • 727 Answers

SOURCE: toshiba 160 error code

For error code C44, it indicates Heater abnormality.

If 1st time occur, u can just go to 08-400, reset the value to "0" then restart the machine.

If happen again, then u need to check the thermistor. Replace it if necessary. If themistor replaced but still happen again, then u need to proceed to check themostat--> heater-->Mainboard-->Switching regulator.

Posted on Mar 09, 2009

  • 727 Answers

SOURCE: toshiba 3510c , error code cd70

CD70 indicates Used toner bag mixing paddle locked.
U need to check following:

1. Do the paddles in the used toner bag rotate? If not, replace a new toner bag.

2. Is the used toner motor rotating? (Perform the output check: 03-414)

3. Is the used toner motor lock detection sensor operating normally? (Perform output check: 03- [FAX] ON/[2]/[G])




Posted on Aug 11, 2009

  • 30 Answers

SOURCE: Toshiba 451c Color Copier experiencing error F105

Hi how are you this is jack my personal Id (jack_pak@hotamil.com)

Dear follow the procedure .....
Other service call

[F105] HDD other error
(1) Check if the connectors of the HDD are disconnected.
(2) Check if the connector pins are disconnected or the wires of harnesses are open circuited.
(3) Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.
(4) Replace the SYS board.
Thanks
Best Regards,

Posted on Aug 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to reset the f101 code on a toshiba 477s studio as I enter service mode


F101 is HDD related error...
If HDD no issue, format HDD update firmware will solve

Feb 24, 2017 | Toshiba Office Equipment & Supplies

1 Answer

I have the error f510 on my toshiba e-studio2555c


Application start error

reinstall the system software

Dec 02, 2016 | Toshiba Office Equipment & Supplies

1 Answer

Toshiba e studio 2051c showing F101 call for service 5 ERROR . How to fix it?


DH, Toshiba e studio 2051c showing F101, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Thread Toshiba 256se 101 4 error
Toshiba studio 2051c Troubleshooting Manual

Aug 03, 2016 | Toshiba e-Studio 2051C Multifunction Color...

1 Answer

My Toshiba e studio 2051c showing F101 & call for service error . How to fix it ?


DH, Check/ read through the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Thread Toshiba 256se 101 4 error
Toshiba studio 2051c Troubleshooting Manual

Aug 03, 2016 | Toshiba e-Studio 2051C Multifunction Color...

Not finding what you are looking for?
Toshiba Copier Gm 2040 Print Scan Enabler E Studio 520 600 720 850 Printer Logo

Related Topics:

16,375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

digivisionm

Level 1 Expert

40 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...