Question about Toshiba E-studio 2330c 2830c Color Multifunction Copier

Open Question

Toshiba e-studio 2830c Will not power up

Copier will not turn on. Power supply appears to be working

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Print driver for Toshiba E-Studio 3511 Copier/Printer for Window

You can go to http://copiers.toshiba.com and download it.

Posted on Feb 04, 2009

Ad
  • 136 Answers

SOURCE: Toshiba e-studio 230 call for service

Call a Service tech
Have him reset yor Counter AFTER he over checks your copier and inspects the Drum,.Transer Unit, and Fuser Unit chances are the previous tech may not have reset the counter
but call for Service to verify those parts are good first ok. I would not want a counter reset to occur if a fuser unit is bad or something. At that low copies it maybe time for corona's to be replaced.

http://www.copierspluswwllc.com

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Close Front Cover For Toshiba E-studio 350


There are many possibles that can cause "Close Front Cover"
Check the front cover actuator, switch. If all covers, switches is working fine, probably power supply is faulty.

Dec 02, 2015 | Toshiba e-Studio 350 Copier

1 Answer

How to do periodic maintenance 0088 in Toshiba Studio 2330c


Toshiba e-STUDIO 2330c
Is given error message "Close Front Cover". The front cover is closed and I can not get error message to go away.
Where can I buy Power Supply (6LG03347000)

Mar 23, 2015 | Toshiba E-studio 2330c 2830c Color...

1 Answer

Toshiba 2330c error cd71


Waste toner transport motor drive locking error.

Jun 10, 2014 | Toshiba E-studio 2330c 2830c Color...

1 Answer

Error code of C970 and call for service


Toshiba Copier Error code c 970 problem solution help: Toshiba E STUDIO 2330C, Toshiba E STUDIO 2500C, Toshiba E STUDIO 2820C, Toshiba E STUDIO 2830C, Toshiba E STUDIO 3500C, 3510C, Toshiba E STUDIO 4520C

PROBLEM:
1.The charger wire at the side door is broken. angry.gif:(" title="Angry">
2. The charge wire is vibrating. angry.gif:(" title="Angry">
3. Main charger grid could be deformed. angry.gif:(" title="Angry">
4. Broken T/S wire. angry.gif:(" title="Angry">
5. High voltage transformer abnormaility. angry.gif:(" title="Angry">

Solution:
1. Check if any foreign objects are on the charger wire. cheesy.gif
2. Check and clean your main charger grid . cheesy.gif
3. Replace the wire and the grid. cheesy.gif
4. Check if the spring of the high-voltage supply contact point is deformed. cheesy.gif

May 08, 2014 | Office Equipment & Supplies

1 Answer

How would you know if power supply surged in my 110v toshiba e-studio283 because it might plugged into 220v by the operator?


Check the fuse. Normally, it would represent a dead set when accidentally plugged to a higher voltage. If you are lucky, the fuses will go off. On the power supply board, there is usually a filter stage and a voltage suppressor stage. The metal oxide varistor will pop or burn out when the appliance is plugged into a higher voltage.

Feb 02, 2014 | Toshiba 2830c,estudio,color...

1 Answer

Estudio 2830c


Double check your printer driver.

Oct 15, 2013 | Toshiba E-studio 2330c 2830c Color...

2 Answers

F14 copier toshiba


off the machine press 0 and 8 at the same time and power on AJ mode appears on the panel..press 388 then start 389 and start off the machine ..then power on

May 04, 2013 | Toshiba E-Studio 166 Digital Copier

1 Answer

Toshiba COPIERS - E-STUDIO 232 Copier bao loi c410


The problem is this :
Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.

the solution is to change thermistors

Jul 16, 2012 | Toshiba E-STUDIO 450 Copier

2 Answers

How can i check the copy counter of toshiba e studio 181 copier machine


Date:06/04/2013Sir
My digital copier toshiba 181 showing page counting 179113 but when doing copy the previous reading is not increasing , it is stopped in 179113. could you give me suggestion to(Programe) reactivate the page counting.
Thanks
Golam Rabbani
Chittagong, Bangladesh

Apr 19, 2012 | Toshiba e-STUDIO 50F Plain Paper Laser Fax

Not finding what you are looking for?
Toshiba E-studio 2330c 2830c Color Multifunction Copier Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

digivisionm

Level 1 Expert

40 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...