Question about Maytag Neptune MAH5500B Front Load Washer
We have been getting a load baning noise during the spin cycle. this has been going on for a few years. now machine does not complete wash cycle.
Purely based on the vague information you have given, this could sound like the drum bearings and the fact that it has been neglected for so long has resulted in serious damage to your machine, note to all, never continue to use machines making noises, it can only get worse and do mare costly damage, after all the problem could have been a very inexpensive fix problems on this and any other site, to be fixed by messages (without actually seeing the machine) can only be fixed - or advice can only be given based on the details that are given if you say my machine just stopped then you will not get an answer will you? engineers can help sort out lots of problems without seeing the machine if we are given the right DETAILED information, no matter how silly it sounds, so before you shout and complain at others, have a thought about what you are going to write sorry its bad news but i hope i have helped
Posted on Oct 02, 2007
He's probably right on that diagnosis. Sounds like you have a bad bearing. Very expensive repair. Another possibility is it shaking and knocking out a off balance or inertia switch. I have seen this happen before. There is one switch on top of tub. One switch on right side of tub and one on bottom. You need to look at schematic and check continuity at machine control board. these switches are in series. If one goes out it will stop spin. I believe that its 2 blue wires at board.
Posted on Oct 06, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
What is the model # of your machine???? The loud banging noise sounds like the loads were getting unbalanced. This is the most likely since i have no problems with the suspension all of a sudden not stabilizing tub properly. If the washer was moved or transported than that would make more sense to me. please provide as much info as you can. Try doing a load of 10 towels. Let me know how that does and with the model # i can help with pulling some diagnostic codes
Posted on Oct 07, 2007
Tips for a great answer:
Oct 02, 2007 | Maytag MAH6500 Neptune Front Loading...
May 26, 2011 | Maytag Neptune MAH5500B Front Load Washer
Mar 04, 2010 | Maytag Neptune MAH5500B Front Load Washer
Jan 14, 2010 | Maytag Washing Machines
Sep 29, 2009 | Maytag Neptune MAH5500B Front Load Washer
Jul 19, 2009 | Maytag Neptune MAH5500B Front Load Washer
Jan 29, 2009 | Maytag Neptune MAH5500B Front Load Washer
815 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: