Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

After washer has stopped, it contunes to drip inside the tube

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Maytag Master
  • 842 Answers

Hi,

Start the washer in a normal cycle, once it starts to fill, unplug the unit from the wall. If the water stops completely its not a water valve issue. If it still drips, replace the water valve to the washer. Good Luck

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Posted on Apr 19, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix a dripping bathtub faucet?


most likely washer in tap is worn.
https://www.youtube.com/watch?v=VyfL2wLqPbA
https://www.youtube.com/watch?v=yflwG8IkRO8
also note the comment in you tube about the rubber washer seal could be a cause.
https://www.youtube.com/watch?v=LV9HIEhr1G8

Nov 04, 2015 | Home

1 Answer

How to stop a driping tap


Try to follow these two you tube videos and see which one applies to your style of faucet.

Good luck.
How to change or tap washer to stop dripping tap or replace the type of...

How To Fix Dripping Tap Washer Change Plumbing Tips

Aug 05, 2014 | Plumbing

1 Answer

My Kenmore Elite Oasis Ht Top Load washer has a slow drip from the drain pipe. How to stop?


If not during a wash it is standing water.

Remove tube and check for cracks. If so, replace. Does/did the washer "walk"? May have rubbed the discharge tube and caused the leak.

Is the down pipe in a cold external wall? May be condensation from humid air hitting cold.

If the sound is the problem, attach a string to the drain pipe so water drips directly to side of vertical pipe.
washer-nelq4qhinul5odf12inlfvjx-1-0_0.jpg

Oct 23, 2017 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Water does not stop running into the tube


Sounds like a professional needs to diagnose and repair/replace the water valves.

Aug 23, 2012 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Just had the idle air control motor replaced and within 1 day, the a/c stopped working and a lot of fluid saturated the front passenger side floor board. Can this recent repair be related to this issue as...


You might take it back to who ever changed the idle air control motor and ask them about it. They could have knocked the drain tube out, or plugged it to stop it from dripping on them or the floor.
You can try this...

Could be the drain tube is partially clogged. It is usually located on the fire-wall or down towards the floor pan under the car. It is usually close to where the A/C lines go thru the fire-wall. About 1/2 inch diameter sticking straight out but may have a 90 degree elbow pointing down.
Also, it's been extra hot and humid all over and moisture could be freezing inside the unit when on MAX A/C, then suddenly melting when switched to normal. This opens the outside air door and allows warm/hot air into the unit instead of recirculating the cold air inside the car. The drain may not be able to handle a large, sudden quantity of water.
Perform a "driveway" test. Open the hood, start engine and run the A/C on normal with the windows or doors open. Locate the drain tube by looking for water dripping. Once located twist 2 or 3 pipe cleaners together and verify the tube is clean. Then close the doors/windows and switch to MAX A/C. Check for water dripping. If it stops dripping, water is freezing inside and now you know why!

Aug 28, 2011 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

Water drips inside tub when washer is not in use. Can't tell exactly where it's coming from or how to get inside the back.


Water valve needs replacing. Determine which one by turning off either hot or cold at the wall and watching to see if drip stops.
Alternatively, just turn off the wall taps each time you finish washing.

Mar 23, 2010 | Estate Washing Machines

1 Answer

Slow drip of water inside the drum. Don't see no moisture but I can hear it dripping. No Moisture on the floor. Any ideas where it could be dripping from?


Turn the water faucets off and listen for the drip to stop.
If the dripping noise stops,replace the water inlet valve on the washer were the hoses connect.
Enter your model number in the site referenced here for parts.

www.appliancepartspros.com

Jan 24, 2010 | Maytag Washing Machines

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...