Question about Frigidaire Refrigerators

1 Answer

How do I pull out tray behind toe grille to clean?

Model number is frs23r4a

Posted by Anonymous on


1 Answer

  • Official Brand Answer
  • 2,267 Answers

Hello Friend, this is Z. Thank you for allowing me to assist you!

The drain pan of your Frigidaire refrigerator (FRS23R4A) is not removable. Hope this helps! Should you need further assistance please feel free to reconnect.

Posted on Sep 10, 2014


2 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 57 Answers

SOURCE: Model FRS23R4A - loud

Somebody hiding in your freezer? Na, I'm just kiddin! Sounds like an evap fan going bad on ya. Eventually you will need to replace the fan!
Thanks and please rate me!

Tips Provided by: Brian Gillespie (GOFAR Services, LLC)

Posted on Aug 26, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Whats the wiring diagram on a frigidaire gallery refrigerator, model number FRS267TH

You should have a copy of it behind the toe grille on the front. Or on the back of the unit.

Nov 14, 2015 | Frigidaire Refrigerators

1 Answer

Why is my GE Monogram, model zfsb26dnd SS, emitting an odor from the front bottom behind the base grill. The air blowing from underneath produces the smell when the fan is operating. The odor appears

If your refrigerator is frost-free, check the drainage tray at the bottom, probably behind a removeable grille. You may find the tray is full of all kinds of disgusting stuff collected by drainage during defrost cycles. Remove the tray and clean it thoroughly. Reinstall the clean tray.

Dec 10, 2014 | GE Refrigerators

1 Answer


Good Morning Jill,

I see that you are trying to remove the doors on your Frigidaire refrigerator, model# FRS23R4A, for shipping purposes. Below are the instructions you will need to follow for both the refrigerator and freezer doors.

If it is necessary to move the refrigerator through narrow doorways, follow these steps to remove the doors.
IMPORTANT: Before you begin, turn your freezer and fresh food controls to "O" and remove electrical power cord from the wall outlet. Remove any food from the door shelves.

1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.

To Remove Refrigerator Door:

1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4. Remove bottom hinge, if necessary.
5. Reverse this procedure to reinstall refrigerator door.

To Remove Freezer Door:

1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on flat sides of each connector and bend both parts back and forth, then with firm grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall freezer door.

When both doors have been reinstalled, connect water line by inserting tube and push until mark touches face of fitting, replace toe grille and plug in electrical power cord. Turn both temperature controls to center position. Adjust settings as necessary. Hope this is helpful.

-Best Regards-

Mar 14, 2014 | Frigidaire FRS23R4A Side by Side...

1 Answer

How to remove and clean grease pan on Vermont Castings model 608SB

The drip tray is accessible from the rear of the Grill. It is necessary to lift up the pan slightly while pulling it out. Or depending on how old your VC grill is, it may be located on the left end of the grill (you should see a small handle). In which case you pull it out and was you reach the end of the drip tray, lift it up slightly to remove it.

TIP: To make clean up of the drip tray easier. Spread a thin layer of Speedy Dry (It's what NASCAR & garages use to soak up oil) on the bottom of the drip pan or tray. You can purchase a bag of it, at any auto parts store, When it comes time to clean the drip tray or pan. Just remove the tray or pan and dump the used Speedy Dry in the garbage. Then, spread a thin layer in it again. Actually, because the Speedy Dry absorbs so well, you'll find that you'll only have to dump the tray or pan occasionally.

Hope this helped you and Happy Grilling!!

Jun 23, 2011 | Grilling

2 Answers

Milk which was spilled in the fridge has dripped into the drip tray behind the fridge and has created the most awful smell. Can the tray be removed for cleaning and if so how?

Yes, usually the tray can be removed for cleaning. You will have to pull the fridge out, unplug power, remove the rear access cover. Then you should see the evaporator / condensate tray and how to remove it.

Jun 22, 2010 | Refrigerators

1 Answer

Need plastic tray replacement for model number BRGG0010/wolfgang puck electric grill.

Replacement parts for the Wolfgang Puck BRGG0010 Grill are available here:

Sorry someone has not responded sooner, but just discovered this site.

May 20, 2010 | Wolfgang Puck CCRG0030 Indoor Grill

1 Answer

I do not have the manual of my kiched aid superba cooking rangeANd I dont know how to find the model number .Can you please help me in finding the model number of my cooking range so that I can find the...

Usually the model number is on the leg behind your bottom pull-out drawer. If not there, then look where the oven door sets into the oven frame on both sides, or the very bottom where the door hinges. If you have an older unit that has a top that lifts up, then look under the top. Some brands hide their model number behind a oven vent or grill, shine your flashlight through the oven air grills and see if their is a model number plate behind the grill. Finally some units will have the model number removed by the factory if it was a unit returned under a lemon law. These are not supposed to be sold to the public, but we have seen them. In these cases the only way to get some parts is to pull the actual part and see if their is a part number on it. Good Luck, Appliance Specialists

Dec 23, 2009 | Kitchen Ranges

1 Answer

Where can I find the model number on my Kenmore side by side refrigerator

it should be right inside the refer
open the door look up
it might be on the upper right
upper left
middle on the ceiling
yes on the cieling
if its an older one
pull off the toe kick
it will be on a plate on the unit behind the toe kick

Oct 04, 2009 | Refrigerators

1 Answer

Kenmore dryer...How to remove toe panel to clean lint out.

Insert a putty knife into the seam where it meets the front panel about 2 inches in from each side. There is a small retainer clip that you will need top depress in order for the panel to release. If you go to and enter your model number, you can find a helpful illustration under the "Cabinet" heading. The clips I mention are listed as item 46 just ot give you a perspective. I would also strongly recommend that you UNPLUG the dryer before cleaning the interior cabinet. There are live voltages present even with the dryer turned off. Particulary around the heating circuits. I hope you find this information helpful.

Oct 29, 2008 | Kenmore 62602 Electric Dryer

1 Answer

Heat in center piece

First clean the condensor coil. it will either be under the fridge behind the toe grill or in the back of the machine behind the rear cover depending on the make and model of your fridge. You will also want to make sure the condensor fan is running. It will be located behind the cover at the back of the unit near the compressor. Post back with the complete model and serial numbers from the fridge if you need any more help.
Thanks, Mike

Apr 03, 2008 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Frigidaire Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides