Question about Music

1 Answer

The red wire goes to a black terminal and the black to a red on the horn. Is this wrong and could it be why it is not working

The red wire goes to a balck terminal on the horn and the black to a red. Is this wrong and could this be why it is not working?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,449 Answers

That is wrong the red is positive .black is negative ,that is earthed to the body of the horn .which in turn is earthed to the car body.by the bolt holding it on.

Posted on Mar 11, 2015

Testimonial: "Sorry - the horn is the speaker in my PA cab (not in a car) - I guess I didn't fill the correct spaces in earlier when I asked the question!"

  • Richard Townsend
    Richard Townsend Mar 11, 2015

    This is in a Peavey Pro 12 PA cab and I am asking about the wires from the crossover to the tweeter (horn).

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 4 behringer b 615 d. And 3 of those the horn have stop playing


There are really only two choices. Either the horn amplifier in each cab is blown, or the high frequency horn driver diaphragm is blown. It's easiest to check the diaphragm first. Open up the cabinet so you can get to the horn driver terminals. Put a voltmeter across the terminals and check for continuity. if it shows open, you've found the problem. Open the driver and replace the diaphragm and you're done.. If the horn driver tests good, it's time to take the cabinet into your local electronics repair place to have them check out the amp section.

Sep 15, 2014 | Music

1 Answer

Sp 3g crossover wiring color code


Horn is red +, black -, mid is white +, blue-, lows are yellow+, blue-. If you look at the crossover board, you'll see the treminals are labeled what goes to where.

Apr 21, 2014 | Peavey Music

1 Answer

Sp 3g crossover wiring


In Peavey cabinets, the woofer is always Yellow + and Blue - and the horn is always Red + and Black -. On the mid the remaining two wires would be the lighter color + and the darker color -

Apr 21, 2014 | Peavey Music

1 Answer

PROPER WIRING FOR ATTACHING CROSSOVER TO PEAVEY SP4G SPEAKERS.


In Peavey cabinets, the lower woofer is always Yellow + and Blue - and the horn is always Red + and Black -. On the middle 15" the remaining two wires would be White + and Blue -

Mar 22, 2014 | Peavey Music

1 Answer

Horn wiring diagram


Yellow is positive, yellow/black is negative.

Feb 19, 2014 | JBL Music

1 Answer

Which wire yellow or blue goes on red post


Peavey color indicates that Blue is Negative And Yellow Is Positive, so Yellow goes to + Speaker Terminal.

Feb 03, 2012 | Peavey SP2 PA Passive Speaker

1 Answer

On my peavey pro 15 neo speakers i don't know which wire is for what. What is the black, red, blue and yellow wires for?


black and red will goto 1 speaker. and blue/yellow to the other. typically red and yellow are + and black and blue are -. the crossover board might tell you which is which where they solder to it. but i'm pretty sure the black/red goto woofer. try hooking up both to woofer and listen to it. 1 way is going to sound horribly wrong lol. that will mean you hooked up the tweeter leads to the woofer. but DO NOT HOOK UP WOOFER LEADS TO TWEETER. thats why i say to do it on woofer.

Aug 30, 2011 | Peavey PR15 400w PA Speakers

1 Answer

I need a color coded wiring diagram for a peavey PV115 speaker cabinet.


Usually the colors you will find are red and black pair and yellow and white... USUALLY the red/blk pair go to the tweeter horn with red going to the + lead of the horn drivers. Usually the yellow/white pair go to the woofer with the white going to the + lead of the woofer in Peavey speakers... HOWEVER you never know if someone has rewired the cabinet so going by colors is NOT the best way to go... This should have the "soundgard" circuit in it and the lead that goes throught the lamp and resistor that is NOT connected to the inout jack is the TWEETER + lead. The pair that connects to the inout jack DIRECTELY is the woofer leads and the TIP connection of a 1/4 inch jack is the + woofer lead. Verifying these connections is the best method.

Aug 15, 2011 | Peavey PV 115 Speaker PA Passive

1 Answer

Somehow have managed to remove wires from drivers (while trouble shooting svt 410 hlf cab) while not labeling them properly for reinstall. so far have not been able to locate a wiring diagram for inside...


Most schematics won't even have any colors listed... so let us have you try this:

Find a system ground someplace like the sleeve of a 1/4 inch jack... Using an ohmmeter check for continuity to the available wires that are disconnected. ASSUME that those showing a low resistance will go to the "-" terminals of the drivers. If you have say a black and red... expect that the black will be one of the grounds... often the red then will be the (+) of the woofer. If you have whites and yellow... OFten the white will also have continuity to ground and be the (-) for the tweeter and the yellow then to the (+). Now since your speaker has 4 woofers we need to be careful to wire then correctly to get the 4 ohm impedance of the cab. IF each woofer is 4 ohms impedance, then we need to wire them in series-parallel. The shell of input 1.4 inch jack will likely go to black wires... two of the speakers will have their (-) terminals connected to these. The tip of the 1/4 inch jack will probably connect to one or more red wires. These will connect to the (+) terminals of the OTHER TWO woofers. Next one of the available (-) with no connections will tie to the (+) terminal of one of the first two woofers. SImilarly the remaining (-) terminal of one of the woofers will tie to the last (+) terminal that is vacant. Note the + of the horn will tie probably to the High level pot and this will tie to the crossover someway.
Here is a site with general schematics.

http://www.bcae1.com/spkrmlti.htm

May 02, 2011 | Ampeg Svt-410hlf (4x10" 500w Svt Bass Cab)

1 Answer

Changing the output Jack on 1985 Peavey Dyna Bass


If this has active circuitry, one of the wires is the cutoff for the power supply from the battery. The other two are black for ground and either white or red for signal.

Mar 13, 2009 | Peavey Music

Not finding what you are looking for?
Music Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...