Question about Sharp Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The L6 code means trouble with the laser unit ( polygon motor), it has to be replaced. The laser unit is under the exit tray. Hope this helps.
Posted on Jan 02, 2008
SOURCE: F2-02 error on Sharp AR-M237
on this code you may have to clean out the developing unit and start with fresh developer. Make sure the developer unit is not leaking from one of the bearings. You may need a tech for this one...
Posted on May 26, 2008
SOURCE: error code Sharp AR-M 257
The F2-04 error code you are getting is that you are using the wrong toner.It may be form sharp,but it toner chips is different.Only the chips swapping at the toner back can help you.
Posted on Jan 27, 2009
SOURCE: Sharp AR-5127 H2-00 code reset
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.
Posted on Feb 01, 2009
Tips for a great answer:
Jun 14, 2016 | Sharp Used AR-M207 Copier Printer Scanner
Oct 23, 2014 | Office Equipment & Supplies
Mar 11, 2013 | Sharp AR-BC260 Color Copier
Jan 12, 2010 | Sharp AR-161 Laser Printer
Apr 19, 2008 | Sharp AR-5316 Advanced Digital Imager...
Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...
Nov 16, 2007 | Sharp AR-5316 Advanced Digital Imager...
111 people viewed this question
Usually answered in minutes!