Question about Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
My name is Peter. I am a retired field service appliance technician.
Hi E61 means that the control board is sensing an incorrect/abnormal voltage present at its input.
1.) Unplug the unit for 5 minutes. If the error comes back -
2.) Lets check your power cord:
a.) Unplug the machine. Is the middle connector on your power cord connected to 'N'?
b.) Tighten all the connectors. Make sure you have a good ground.
c.) Check the voltage. Between 'L2' & 'N' = 110V, 'L1' & 'N' = 110V, 'L2' & 'L3' = 240V.
3.) Lets check your control board for shorts:
a.) The following link will show you how to access. Ground yourself by rubbing your hands on bare metal. Static electricity will knock out a board.
b.) Check all of the connections, push in on the wires at the connectors.
c.) Reassemble and try to start
4.) Well, if none of the above solved the problem, you have to replace the control panel.
Part #: 134523106 - Cost: $168.00
Posted on Dec 08, 2014
think its Insufficient heating (maximum time exceeded).
Possible fault Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty.
Machine Status/Action Cycle paused.
Posted on Dec 16, 2016
Tips for a great answer:
Dec 16, 2016 | General Dryers
Jun 08, 2016 | Frigidaire Dryers
Oct 03, 2015 | General Heating & Cooling
Nov 01, 2013 | Frigidaire Washing Machines
Jan 23, 2013 | LG LSC183VMA Split System Air Conditioner
Mar 10, 2010 | Sony Handycam DCR-SR42 Camcorder
Jul 02, 2009 | Frigidaire GLTF2940ES Front Load Washer
Jan 21, 2019 | Maytag Washing Machines
25 people viewed this question
Usually answered in minutes!