Question about Washing Machines

Open Question

Is it worth to replace the keypad board assy. if the kenmores Mirco is 8 years old Mod# 401.85042010 ser# 027mmo1260 it is all scrambled up !

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 163 Answers

SOURCE: My kenmore dryer will not turn on. I push the

If you have a kick plat at bottom of dryer then your fuse will be in front.same color same procedure.

Posted on Mar 06, 2009

Ad
  • 1 Answer

SOURCE: My GE spacemaker JVM 1440 Watt microwave has F4 error code.

Have GE JVM1440BH light and fan that are operated by the touch pad do not work. Both stop working at the same time. Ideas????

Posted on Aug 14, 2009

  • 41 Answers

SOURCE: Is it worth replacing a door gasket on a 25 year

Is the door gasket torn?? if not try cleaning the rubber surface that makes contact with the metal portion of the fridge and clean the metal area also, because inside the rubber gasket is a magnet that helps the gasket seal properly.I've seen door gaskets range in price from $50.00-$100.00 so if thats the only problem it sure beats buying a new fridge for a whole lot more money.

Posted on Aug 25, 2009

  • 1937 Answers

SOURCE: Kenmore washer odor

The most likely cause of a burnt rubber smell is a worn motor coupler.

Sears parts site

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.24922200&pop=flush

Go to the sub section with the brake/clutch/motor/gearcase and item # 13 is the motor coupler between the motor and transmission.

It has three parts. 1. A plastic piece with three prongs fits on the transmission input shaft. 2. A plastic piece with three prongs fits on the motor output shaft and 2. a RUBBER grommet with 6 holes fits between them.

Over time, the rubber piece can wear and the two plastic pieces can rub against it at speed causing a rubber burning smell.

Replacing one is easy.

Remove the cabinet, the pump (2 clips) the motor (two screws and clips) and the motor mounting bracket (two 1/2: bolts).

Remove the rubber piece and pry off the two plastic pieces. Fit the new plastic pieces on the transmission and motor shafts. Replace the mounting plate. Carefully line up the six holes as you put the motor back on.

Replace the motor mounting clips, the pump and clips and cabinet.

Posted on Sep 21, 2009

jsrock516
  • 5911 Answers

SOURCE: want an owner manual for an old Kenmore 70 series

Go to managemylife.com and type in the model number you provided under the "Manuals" link. Your owner's manual is listed in a .pdf (Adobe) format that you can download or print for FREE. I hope this helps you.

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Want an owner manual for an old Kenmore 70 series washing machine havy duty super capacity plus mod. # 110 22722101 ser. # CL4432583


Go to managemylife.com and type in the model number you provided under the "Manuals" link. Your owner's manual is listed in a .pdf (Adobe) format that you can download or print for FREE. I hope this helps you.

Mar 07, 2010 | Kenmore Washing Machines

1 Answer

We have a kenmore elite washer mod. 970-c40062-00 ser. xc11700832. the washer leaks, and is very noisy. It is 10 years old


Your Stainless Steel drum is supported inside of the washer tub by a spider assembly. The assemply, which is made of cast aluminum, has corroded (steel and aluminum and detegent don't mix) and the spider assembly has broken. The drum has likely wobbled enough to wear a hole through the tub. You need to replace the drum and spider assembly, and tub.

Mar 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

My kenmore microwave is 2 years old. the keypad no longer functions. Can it be replaced? would it be worth it?


Is it possible that some spray cleaner got into the controls?

I always recommend that users instead spray cleaner on a soft cloth then wipe the control panel.

Also, I always recommend non-ammonia cleaners since ammonia can crack and damage plastic.

Otherwise, the spray can get into the controls and lock it up or make it act odd.

If it does not dry out over time, it may need to be manually dried or blown out.

The keypad may be damaged or worn out, or control unit may be damaged.

On some models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you unplug the keypad (as per the photo below) and move the circuit board into your frame.

34374fd.jpg

Some connectors on the relays may have a lock:

positivelock.jpg

You can find handy exploded views and get part numbers by entering your full model number at the
Sears Parts Site.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

Once you have the Sears part number, you can usually get parts cheaper here.

If you might be interested in having us so the work for you, we charge $39.95.

Feel free to contact me directly.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Oct 08, 2009 | Kenmore Microwave Ovens

1 Answer

Gas dryer


Hi Mette-q,
Welcome to fixya.com

I'm Huuum,


You said,you have a Kenmore gas dryer mod. 110.95087400 ser. ms0201135 it's a smartheat quiet pak9. Is there anyway I could convert this from natural gas to electric, is there a conversion kit available.



They do have conversion kits for gas to LP.
But I believe that there is no gas to electric.
You must find a gas line from some where in the home and run it to your location, or buy an electric dryer.
Remember that if you can run a gas dryer it will save you 30% on your energy bill over electric and in time pay for the cost of running the gas line to it.
I hope you are not in an electric only house!

How old is the dryer?? Waiting for your response!
Thanks for giving me the opportunity to help!
Please do not for get to give a rating before you sign off!
Thank You, HUUUM



Here is a interesting report that I just read today



Repair or replace?

When to pull the plug on your old refrigerator

It nearly always makes sense to undertake simple do-it-yourself repairs,
such as replacing a gasket on a refrigerator or a freezer.

Typically, you'll also find a troubleshooting section for more-serious problems
in the owner's manual.

Should you pay for a repair or buy a new model?
The answer depends mostly on the age of your refrigerator,
how much you bought it for,and the cost of the repair.

Follow these guidelines:

When a repair makes sense.

If your refrigerator is under warranty or less than four years old (three years for top-freezers),
paying for a repair makes sense.
Note that refrigerators under warranty might require service from a factory-authorized technician;
readers have found them on a par with independent repairers.

When a repair might be a wise choice.

If your refrigerator is out of warranty and is four to seven years old,
it might make sense to pay for a repair. Customers generally pay $100 to $200 for a repair.
But you might want to buy a new model even at this stage,
given that today's models are quieter and have added features.
Higher energy efficiency is another plus: Energy Star-qualified models made after April 28, 2008,
are 43 percent more efficient than conventional models built before 2001 and 56 percent
more efficient than those built before 1993.

When it pays to replace.

The repair costs more than half the price of a comparable new refrigerator.
Data also shows that it doesn't pay to fix a less-expensive top-freezer refrigerator
six or more years old or a bottom-freezer or side-by-side eight or more years old.

Thanks to better recycling programs, less than 10 percent
of a refrigerator you replace is likely to end up in a landfill.







Sep 22, 2008 | Kenmore Elite HE4 Electric Dryer

2 Answers

Problem with a different range...


Tom, generally a f1 code implies a control problem. The tech sheet gives 3 possible causes. 1. A shorted keypad, solution to replace electronic control. 2. Controls internal checksum has become corrupt, solution is to unplug for 30 seconds, if the code comes back, replace the electronic control. 3. Control has sensed a overheating condition, relay on the board may have shorted out. Each one recommends replacing the control board. The part I have for this model number is 316127903. Says it's grey. Catriver..post back.

Oct 24, 2006 | Kenmore 79383 Dual Fuel (Electric and Gas)...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...