Question about Westinghouse Televison & Video
Posted by Anonymous on
Hello, try to update the Firmware, search the Internet, on the Westinghouse website, place the model and look for firmware updates and copies in an empty USB memory, without any type of content
In most cases,this is the procedure to follow, after downloading, with the TV off or disconnected, you place it in the USB port of the TV, turn it on and wait for the cycle to end
Confirm on the Westinghouse page that this is the correct procedure
I hope you can solve the problem
Greetings Franco Dosil
Hola, prueba hacer la actualizaci?n del Firmware, buscas en Internet, en la pagina de Westinghouse, colocas el modelo y buscas actualizaci?n de Firmware y copias en una memoria USB vac?a, sin ning?n tipo de contenido
En la mayor?a de los casos, este es procedimiento a seguir, luego de descargar, con el televisor apagado o desconectado, lo colocas en el puerto USB del televisor, lo prendes y esperas que termine el ciclo
Confirma en la pagina de Westinghouse, que este sea el procedimiento correcto
Espero puedas solucionar el problema
Saludos Franco Dosil
Posted on May 28, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If your set was manufactured around July 2005, you may need a firmware upgrade to solve this issue. On the Sony website you can enter your model # and serial # to see if you TV is affected. If so, it is easy to have done and may be free from Sony. It sounds like the issue they described in the writeup on the required formware update. I had mine done within few months of when i bought it (purchased in Dec 2005) and it has been working flawlessly since.
Posted on Oct 21, 2008
www.cfusion.com has the spare parts for that tv. it sounds like it is the mainboard. shouldn't be more than 150-200 to replace.
Posted on Apr 03, 2009
HI, this may be a simple cooling issue. try inspecting the cooling fans that are located near the power sector. if these cooling devices are not operational, they will cause the power board to shut down periodically, due to heat build up.
If the fans are operational, this will confirm a weak and defective power power board.
Posted on Jul 21, 2009
The problem is cause by the transformer on LIPS inverter (Power supply + Inverter board). You could see an obvious burn on the 1 of these transformers ( There are total 3 black transformer on this board). The part number is 4302H. It is available online at http://www.lcdparts.net/TransformerDetail3D.aspx?ProductID=2775
Posted on Jun 12, 2010
Tips for a great answer:
Jul 18, 2017 | Westinghouse Televison & Video
Apr 03, 2015 | Panasonic TC55LE54 55" 1080p 120Hz SMART...
Jan 15, 2014 | Vizio E322ar
Aug 17, 2013 | Samsung LN46D630 LCD TV
Aug 29, 2017 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...
Dec 07, 2009 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV
252 people viewed this question
Usually answered in minutes!