Question about Minolta Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: error code c-2833
CAUSE: LD Power becomes saturated when performing Auto Gamma adjustment in a low humidity condition.
SOLUTION: Perform the following adjustment:
2. [Machine Admin. Setting].
3. [System Setting].
4. [Expert Adjustment].
5. [Process Adjustment].
6. [Toner Quantity / Exposure].
7. Select the proper Exposure Adjustment [Yellow, Magenta, Cyan, or Black] by using the Next/Previous button.
8. Select Standard then select [-2] under Exposure.
9. Press OK.
a. If the problem persists, replace the problem color drum since the cause of the SC is the combination of drum characteristic and humidity.
b. The following codes = colors: C-2831 = Yellow; C-2832 = Magenta; C-2833 = Cyan; C-2834 = Black.
Posted on Dec 07, 2009
Try this It could do the trick for you.
The error code c3451 refers to a copier warm up error; the machine had not reached the correct temp within a specific time.
I bet it happened when you first switched on one morning.
Easy to reset and fault usually goes away.
To Reset switch machine off using the switch inside the front door, not the one on the control panel.
Whilst holding the UTILITY key down on the control panel switch the machine back on keeping the UTILITY key held down. Eventually a Trouble reset key will be displayed in the LCD screen, touch this, OK will be displayed then power the machine off and then back on.
This will reset the error code, if the code reoccurs then there will be a problem with the fuser unit in the machine, and this will require replacing.
Hope it did work for you.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Apr 28, 2010
Hi, I have a C6500 Bizhub pro, but, recently displays an C2404 error. I need to print an urgent job and y can't!
Posted on Sep 15, 2011
Tips for a great answer:
Mar 27, 2017 | Minolta Office Equipment & Supplies
Dec 14, 2016 | Konica Minolta Office Equipment & Supplies
Sep 21, 2014 | Konica Minolta bizhub Office Equipment &...
Feb 23, 2014 | Minolta bizhub 200 All-In-One Printer
Jan 23, 2013 | Konica Minolta bizhub C250 All-In-One...
Oct 05, 2011 | Konica Minolta bizhub 350 All-In-One Laser...
Jan 21, 2011 | Konica Minolta bizhub 200 Printer
Jan 07, 2010 | Konica Minolta Office Equipment & Supplies
Dec 03, 2009 | Konica Minolta bizhub C250 All-In-One...
Oct 22, 2019 | Minolta Office Equipment & Supplies
26 people viewed this question
Usually answered in minutes!