Question about Whirlpool Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Possible your belt is loose; you have to unscrew the back after disconnecting electrical connection from wall socket. If the belt "gives" more than half an inch, you have to loosen the motor bolts and push motor upwards, then tighten the bolts very well. Try spin only to check, before closing the behind. It shd spin very fast.
Posted on Apr 25, 2007
Hi, we had the same problem with a WD420P. After a washing machine repair man plugged in the diagnostic machine and found that there was no fault, my boyfriend had a look. The nut securing the cooling fan inside the heater element was not tight so the heater overheated and tripped it's stat. This was a 5 month old part fitted after the original was replaced under warranty.
Posted on Jan 14, 2008
Sounds like the the motor belt is worn or off. Try a new belt, or check the drain pump filter for clogs.
If you've got a handy friend, it's easy to check these... remove the back of the washer (about 12 srews) and check for black dust inside, or a belt hanging or lying on the bottom.
To check the drain pump filer screen, look for the drain hose, follow it into the back of your washer and down to a plastic bow looking unit. There should be a round cover with a kind of handle on it. remove the cover, (water may run out... have a few towels handy) clean off lint etc. and put back together. Try again...
Posted on Feb 07, 2008
replace door switch.If the computer thinks the door is open, it will not fast spin as a safety precaution.
Posted on Feb 27, 2008
SOURCE: Clothes don't spin dry enough
Is the heating element working, have you tested it or noticed whether your clothes are coming out warm. It may have gone bad and needs replacing. Let me know if you have questions with this or need a place to buy the part. There are many online sites that will sell you a new element
my best to you
Posted on Aug 08, 2008
Tips for a great answer:
Jul 15, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...
Sep 30, 2008 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Feb 10, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...
Jan 17, 2010 | Washing Machines
Jan 16, 2010 | Washing Machines
Jan 11, 2010 | Haier XQG50-11 Front Load Washer / Dryer
Dec 25, 2017 | Washing Machines
Apr 22, 2009 | Whirlpool Washing Machines
Mar 08, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...
Nov 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Jul 14, 2019 | Whirlpool Washing Machines
22 people viewed this question
Usually answered in minutes!