Question about Televison & Video
One or more of the LED backlight strips has failed. It is repairable but the cost to have a repair shop do it may be more than the TV is worth.
Posted on Jul 12, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Most likely the set has lost vertical sweep or the feedback from that circuit. This will shut the set down to prevent a horizontal line from burning the face of the CRT. This will have to be looked at by a technician.
Posted on Sep 11, 2009
Problem is in either power supply or - my bet - the Y-Sustain board.
The Y-Sustain is a relatively large board out of which go connections to the side of the display; it's therefore closer to either the left or the right side of the display, has at least one rather large heat sink on it and fat power cables connecting it to the main power supply.
Often there are fuses on that board - one or more. Check those.
if they are blown you can try to replace them, but expect them to blow again - usually the whole board needs to be replaced.
often that *needs* to be done in a service center as there are some adjustments to be made after replacement; don't know about this particular TV model.
Posted on Aug 13, 2010
Tips for a great answer:
Mar 26, 2017 | RCA Televison & Video
Dec 29, 2015 | Seiki 32" LED HDTV SE322FS - CAM CONSUMER...
Dec 21, 2015 | LG 47LN5400 47" LED TV 1920x1080, 120 Hz....
Feb 18, 2015 | SEIKI Digital SE322FS 32" LED TV 1366x768,...
Jun 04, 2014 | Samsung 5 Series UE32F5000 32" LED TV...
Aug 25, 2012 | Televison & Video
Dec 10, 2017 | Sony KDL-32M3000 32 in. LCD Television
Sep 11, 2009 | Samsung LN32A330 32 in. LCD TV
Jul 17, 2019 | Sony Televison & Video
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: