Question about Hitachi Televison & Video
Unplug. Press and hold power button 10-15 sec's then repower see if ok. Most tv's will go into standby if there is no signal detected.
Posted on Jul 12, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The SMPS - power supply is critical of the generated frequency , load trip and high voltage. So if the power transistor has blown then you must check the reason for the failure before the new one is put into the circuit. Check the DC voltage, check the rectifier, storage capacitor and the frequency oscillator. check for short in the SM tranformer , feedback optocouplers or a possible short in the main circuit.
Please check the link below for help:
Posted on Feb 08, 2011
Fault is with its main board itself. Check the horizontal scan output section circuit. Check the horizontal scan output transistor for leak. Contact any service technician. As standby-light is there, the main power supply regulator section circuit to your TV is working fine. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box.
Posted on May 13, 2014
Tips for a great answer:
Oct 03, 2014 | Hitachi C21 F800S TV
Feb 17, 2008 | Hitachi C21 F800S TV
Feb 08, 2011 | Televison & Video
Jan 15, 2011 | Hitachi C21-RF80S 21" TV
Sep 25, 2010 | Hitachi C21-FL21F 21" TV
May 24, 2010 | Hitachi C21 F800S TV
Jul 30, 2008 | Hitachi C21-RF80S 21" TV
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: