Question about Televison & Video

Open Question

How do I set up Freeview on my TCL tv - Televison & Video

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TCL TV is stuck on HDMI


change to tv air then channel search

Sep 10, 2018 | Televison & Video

1 Answer

Sharp tv was set up with satelitte- now no signal with freeview box - do i have to reset tv?


Have you changed the input setting on the TV to match up with the input port you have plugged the freeview box into on the back of your TV?

Mar 02, 2015 | Sharp Televison & Video

1 Answer

Tcl tv code for directv remote


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
DirectTV remote control code list is given.

Oct 14, 2014 | TCL L32D20

1 Answer

How do i set up freeview on tv


How do set up TV with Freeview built in

Freeview is not a satellite provider. It is an off-the air provider, meaning you need to have an antenna to receive Freeview channels. Either you need a digital converter box or a TV with a build in converter.

About Us

Jun 09, 2014 | Televison & Video

1 Answer

I have just bought a Digihome pvr320sd tv recorder with freeview, can i set it up as a tv recorder only without the freeview as i already have built in freeview on my tv.


When you set up the recorder Freeview stations will be stored. This means that you can record TV stations without watching them. So you can say watch BBC1 on your TV and record a program on Channel Four. You need the recorder set up with Freeview to recorder channels. Otherwise you would have to have your TV on and recorder set to record via the scart lead. Which would be not great quality and messy.
You should be able to loop the aerial lead so that both the TV and recorder can get the signals from your aerial, if that's what is bothering you.

Dec 22, 2012 | Televison & Video

2 Answers

Searching code for 3 digit of TCL TV for installation of universal remote control


TCL has no three digit setup codes. Four digits codes for TCL are: 0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058

Oct 22, 2012 | Televison & Video

1 Answer

Similar problem as you helped me solve before.


OK, I think I see the problem there.
The aerial lead from the DVDR to TV should be removed.
You should have it setup the same as the other Freeview - VCR - TV
Nutshell time:
Main aerial to Freeview input.
Loop aerial from freeview output to DVDR areial input (all this does is allow you to watch freeview, or standard both out of the DVDR)
So..
Scart from Freeview to DVDR input
Scart from DVDR output to TV
Set DVDR to AV input mode.
Set TV to AV (whatever number you need for that..you now won't get anything on screen unless you have the right input selected)

If you can now see the Freeview picture on the TV and change the channels with the Freeview remote then you should be set for recording.

Having the aerial and a scart lead both going to the TV is not needed.

Apr 14, 2008 | Philips VR550 VHS VCR

2 Answers

CODE FOR TCL TV UNIVERSAL REMOTE CONTOL-CHUNGHOP RM -133E


If you don't have a code you can do these steps to get your universal remote working with pretty much any tv:

1.) Turn your TV on. Then on your remote press the set button, it's the small gray button above the green button that says TV.

2.) Press the TV button. There should be a red light to the right of the SET button. This means that your remote is ready for the TV code.

3.) To find the TV code, press the + or - on your remote. This is located above the orange buttons. Once the volume on your TV goes up or down, stop pressing the + or - button.

4.) Then press the SET button again to set that code for your TV.

If the above steps do not work, keep trying. It will work! ;)

Jan 30, 2008 | Televison & Video

1 Answer

TV, freeview, DVD and video set up.


Hi.
Modern day freeview boxes rarely have A modulator in them so you can not tune it to a channel on your tv it must be connected using scart lead.
Most freeview boxes have 2 scart sockets one for VCR & one for TV plug your scart leads in to the scart sockets of freeview they will be labled TV & VCR.
The scart labled TV goes to scart socket on the TV labled AV1 or 1
The scart labled VCR goes to scart socket on VCR labled AV or IN
Now the aerial leads From wall socket to ANT in on freeview.
Then from RF out on freeview to ANT in on VCR.
Then RF out on VCR to ANT in on TV doing this will enable you to put TV on 9 to watch tapes.

The final scart will be from DVD to TV socket marked AV2

You will need to put TV on AV channel to view freeview.
To record freeview you must put VCR to EITHER line.av,aux. it will be one of those different manufacturers call them by varying names.
I have done this banking on your tv having 2 scart sockets if it only has 1 let me know & I will tell you how to wire it differently.
Please state make & model of TV set & VCR & what connections are available EG scart, Phono, Svhs etc.

http://dysonmanuals.llc.nu/

Chris..
0d03403.jpg

Jan 20, 2008 | Televison & Video

1 Answer

Can't re patch tv with set top box to watch tv


Hi.

Ok here goes.

1) Take airial lead from the wall socket in to antenna in on freeview box.

2) connect short usually black airial type lead in to antenna out socket on freeview. plug the other end of this lead in to aerial in on vcr.

3) connect the other end of this aerial type lead to airial plug on the back of tv.

4) now if you have 2 or more scart sockets on the back of tv set plug in the scarts in this order.
Freeview box scart with tv on it connect to scart 1 on tv set.
Freeview box vcr scart connect to vcr in scart socket on vcr.
Vcr scart marked tv plug scart from here to scart 2 on tv
If you have 3 scart sockets on tv you can connect dvd using scart to scart socket 3 on tv.

If Tv has only 1 scart the aerial leads will stay the same as I have stated,
Freeview must go to scart socket on tv set.
leave second scart from freeview to vcr plugged in so you can record freeview by putting vcr to line 1 or AV 1.
you will need to put tv on channel (0) & tune this channel to the video play a tape that you recognise then go to tv tuning & tune tv untill you see video playing then store this on channel (0).
DO NOT USE AUTO TUNING IT WILL PUT CHANNELS IN THE WRONG ORDER JUST USE MANUAL TUNING.

Now to view Dvd you will either need to purchase A scart switch box. Or have keep unpluging freeview scart from tv so you can plug in dvd .

If your tv has red yellow white phono sockets you can plug dvd in to these, you may need to purchase phono leads.

Hope this helps.

http://dysonmanuals.llc.nu/

Chris..

Jan 08, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

5960 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...