Question about Washing Machines

Open Question

Hi, I nave a problem. on the second half of washer machine cycle the wither is not emptying completely.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: fills washes rinses but wont spin properly or empty out

its likely the pump is blocked (hence the humming) with a coin or some foreign object. To check, lower the outlet hose to ground level to allow the water to empty. Tip machine back & lean against a wall, remove the pump & remove object if there is one! Reassemble & try machine again

Posted on Oct 19, 2007

Ad
  • 1294 Answers

SOURCE: zanussi washing machine

Check your filters first, then the pump. Refer to your manual; or click troubleshooting above.............sure would get some tips.

Posted on Jan 16, 2008

  • 417 Answers

SOURCE: Zanussi ZWD1680W Front Load All-in-One... Problem:

With the symptoms you describe i would suspect a intermittent heater element fault as you are getting earth leakage current which is tripping the whole supply rather than a current overload which would just trip the socket circuit breaker. Get the heating element checked over first as this is the most likely cause.

Posted on Nov 04, 2008

  • 353 Answers

SOURCE: won't complete cycle get an F 21 error

check your filter

Posted on Jun 11, 2010

muffteck
  • 202 Answers

SOURCE: whirlpool washer machine WTW5790SQO washer trips circuit breaker half way through cycle

you are pulling to many amps see if breaker is faulty first.....see if washer is in the spin and jumping around when this happens run washer with out wash in it and see if it does it something is pulling to many amps to blow breaker or could be just a bad breaker,,,, pulg something else in the wall plug that the machine is plugged in to (like a toster) and see if it trips then if so probably the breaker

Posted on Nov 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi - my washing machine keeps f05 coding & the green start light won't come on


Is the outlet pipe blocked. Check this as sometimes the water gets backed up and this is sensed and an error is displayed

Mar 28, 2015 | Washing Machines

1 Answer

I have an Amana front load washer, it will run through a complete cycle when empty but will not run with a load in it.


Hi Ben
I see you have posted on this before , I think you may have done this already judging from your post , but have you checked the filter on the drain pump? also when you run a cycle empty, is it filling and draining the water correctly , or is there water left in the machine , and last is the drain hose high enough to make sure that there is not a "syphoning" effect taking place as in when it fills with water it drains at the same time , just a thought let me know.

Oct 13, 2017 | Amana Front Load Washing Machine Washer...

1 Answer

The machine will wash but will not spin the program keeps running but when it comes to the spin cycle it will not spin but the timer keeps going


Hi Christine - Often when a unit does not spin, it is because the unit cannot properly drain and dispose of the water and detergent solution. Does the unit make a humming noise? If so, the drainage hose/pump may be clogged and needs to be cleaned. If not, the washer may possibly be experiencing an issue with the door lock assembly, faulty pump, timer or control board not communicating correctly. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the unit.

Jul 11, 2013 | Electrolux Washing Machines

2 Answers

Ul code about 10 to 15 seconds into spin cycle machine is level code comes up even if i run it empty


Hi


Thanks for using FixYa. UL is displayed when the machine/motor control detects an off-balance load, and is steady on while the washer runs a mini-cycle to rebalance the load.
• Display clears if mini-cycle successfully rebalanced the load.
• If the mini-cycle is unsuccessful, uL will flash until the door lid is opened, allowing the customer to view and redistribute the load. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 22, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Drum not emptying water


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

May 20, 2010 | Indesit W 123 Front Load Washer

1 Answer

Smell coming from inside washing machine. Not musty.


This is a fairly common problem that often arises when the majority of washes are done with cold water.

Do what is called a maintenance wash where you set the machine to run with hot water and maximum fill of water. Add one half cup of baking soda and let it run through it's entire cycle with absolutely no clothes in it.

After it completes its full cycle check for that bad odor. If it is fully gone wonderful. If it is half as bad do a second maintenance wash.

If the maintenance wash doesnt seem to help at alll get back to me and I will make another recommendation.

May 25, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...