Question about Singer 7442 Mechanical Sewing Machine

4 Answers

Singer 4562 t bobbin case won't fit properly, what am I doing wro

I have a Singer 4562 t sewing machine, the bobbin case broke, I purchased a new one but cannot get it to install correctly. What holds the bobbin case in and should it be tight when installed? It seems to be so tight the housing underneath does not move properly. Could there be something else wrong besides the bobbin case?

Posted by on

  • Anonymous Mar 17, 2014

    How do I replace the bobbin case in my singer model#418

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Make sure the bobbin case sets sort of on top and not under the ridge of the metal ring. There is a small latch on the upper left of the bobbin case. It is metal. rotate the latch to cover the bobbin case and this should stabilize the case without making it immobile

Posted on Aug 01, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have the same trouble this will be two casees I have got.

Posted on May 02, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Make sure that you buy Singer Brand Bobbins. The generic brands will not work on my Singer, but they will work on my Brother. The top of the Singer Bobbins is slightly curved and the Brother bobbins are flat.

Posted on Oct 30, 2016

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Where can I find snap on parts for my Singer 4562T

Posted on Apr 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having a difficult time finding pressure feet for my Singer 4562 such as button hole, button sewing, embroidery, walking foot, quilting foot, etc.


You should be able to find presser feet for your machine as long as you know what type of shank your machine takes. Just confirm that whatever you choose will fit a Singer model 4562. You can even purchase a snap-on shank adapter and then purchase snap-on feet for your machine.

Product Quick Search 318 335 4567

Sewing Parts Online Search

http://parts.singerco.com/CPpartCharts/4_4999 (look for 4562)

...

Apr 23, 2016 | Singer Sewing Machines

1 Answer

I have a Singer 4562 T sewing machine. When I try to sew the bobbin case is jumping out of the housing. With the slide closed I sew until everything gets a mess on the underside. When opening the housing...


pl open the entire bobbin housing two scrwes with suitable screw driver and clean .test the latch on the bobbin case,look for steel tension strip screw replace the unit ,also replace needle

Dec 11, 2013 | Singer 7442 Mechanical Sewing Machine

1 Answer

Singer 4562


here is a link for a free manual, then information of how to insert the bobbin case into the machine
http://www.singerco.com/uploads/download/435_5_8_10_16_22_dial.pdf

Sep 08, 2013 | Sewing Machines

2 Answers

My bobbin on my Singer 4562 keeps bunching up the threads, can you help?


If you have the black bobbin case you must make sure you use only a good mercerised thread, there should be enough gap between the edge of the bobbin case and the silver adjuster to allow the thread to pass through, if there is not then you must slacken off the two screws and move it over a fraction.

Aug 11, 2011 | Singer 2732 Mechanical Sewing Machine

1 Answer

I have a Singer model 4562 T sewing machine, and threading the bobbin, the bobbin case just kind of popped out. I've tried just sliding it back in, but no matter which way I put it in it doesn't seem to...


The bobbin case is designed to be removed for cleaning. Take off the needle plate if it is still on the sewing machine. Make sure that the needle and presser foot are fully up. Guide the forked end of the bobbin case under the feed (more or less centered). Then pull the bobbin case under the rim of the position plate. Pull on the side opposite the forked end of the bobbin case. With a small screw driver, turn the lever (at about 10 o'clock on a 12-hour analog clock) towards you. This will lock the bobbin case into place. Make sure that the bobbin case isn't locked too tightly. It still needs to move slightly as the bobbin turns and the needle comes through that plate.

Replace the needle plate and lock it down. Then insert the bobbin and close the slide plate. The manual shows the procedure to remove and replace the bobbin case on the 4562 on page 39. Singer has the manual on the support page: http://www.singerco.com/support/instruction-manuals . The direct link to the manual is http://www.singerco.com/uploads/download/435_5_8_10_16_22_dial.pdf .

I hope this helps.

Cindy Wells
(I hope that the locking lever hasn't broken. That may require a service person to solve the problem. I'm not entirely sure where that lever is connected to the machine. Some Singer part diagrams are here: http://www.singerco.com/support/replacement-parts-chart . The 4562 may use the same diagram as the 4572, http://parts.singerco.com/CPpartCharts/4_4999/4572.pdf .)

Jul 01, 2017 | Singer Sewing Machines

1 Answer

I don't not have the Instructions on how the bobben should be threaded in the bottom of my sewing machine. I have tried everything that i can think of but it well not thread. If it dose come up it dose not...


The manual for this sewing machine (Model 4562) is available and may be downloaded at no cost from Singer.  The Link to that page is: http://www.singerco.com/accessories/manuals.html

Inserting a wound bobbin is found on page 15.

Aug 09, 2008 | Singer 7462 Mechanical Sewing Machine

Not finding what you are looking for?
Singer 7442 Mechanical Sewing Machine Logo

5,207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Cindy Wells

Level 3 Expert

6028 Answers

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...