Question about Zebra 105SL Thermal Label Printer
I keep getting the warning light flashing and message "Warning Ribbon In" on the printer display, however there is no ribbon in the printer. The Print head was recently changed, would this cause this error? how do i stop it? Thanks for any help.
Had the same problem with a ZM400. As stated in the User manual (can be downloaded http://www.zebra.com/id/zebra/na/en/index/resource_library/manuals.results.html?FRRBarcodePrinters=6882), warning "Ribbon in" is usually caused by the wrong printing method (thermal direct instead of thermal transfer [which should be selected for ribbbons]). My error disappeared after choosing "thermal transfer" directly on the printer. For network printers this needs to be set by an admin in the network settings for the the printer to solve the problem permanently.
Posted on Jun 15, 2010
Make sure the ribbon sensor is in the proper position and that there is nothing covering it, like a piece of label that came off and got stuck to the sensor. Here is a link to a picture of where the sensor is located: https://support.zebra.com/cpws/docs/xi3plus/140xi3plus/images/140xi3p021.jpg
I hope this helps!
Posted on May 13, 2008
Make sure the Print Method is correctly set! Although I exclusively use Thermal-Transfer (ribbon is loaded along with label stock) my 140xIII had Print Method set to Direct-Thermal and printed labels just fine. The only problem I could see was that the Ribbon In warning would not go away.
After changing the Print Method the warning went away and printing continues as before.
Posted on Apr 29, 2009
I have got the labels in line or make it the b but still its showing error RIBBON -IN with printer idle
Posted on Nov 02, 2014
THE RIBBON IS LOAD BUT THE PRINTER IS NOT SET TO WORK WITH RIBBON, YOU SHOULD CHANGE THIS PARAMETER IN THE OPTION "RIBBON" SHOWS YOU YES OR NOT, YOU MUST CHOOSE YES AND THE MESSAGE DISSAPEARS, I JUST FIXED IT 5 MINUTES AGO.
Posted on Dec 28, 2012
Warning ribbon in it print 2 labels then stops.
Posted on Sep 25, 2012
I got this message...opened it up and there was a label stuck to the roller.
Posted on Jan 08, 2010
Initially checked with above solutions and then tried with below steps which I missed.
After changing the parameter from Thermal Transfer to Direct transfer- you need to then press the Calibrate button on the front of the machine- that's all then you are done - That fixed the problem
Posted on Aug 09, 2013
Did you make sure you put the ribbon sensor plate back in? If not you will get this message
Posted on Jul 16, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 19, 2015 | Zebra Office Equipment & Supplies
Nov 10, 2010 | Zebra Z4Mplus Label Printer
Press the pause button to take the printer off pause...
The data light is flashing because it has labels to print...
Check to be sure your ribbon is loaded properly.
Jun 20, 2010 | Zebra 203DPI Printer
Apr 21, 2010 | Zebra 140XiIII Plus Thermal Label Printer
Mar 01, 2010 | Zebra S4M Thermal Label Printer
Feb 04, 2010 | Zebra Z6M Plus Thermal Label Printer
Oct 27, 2008 | Office Equipment & Supplies
Oct 15, 2008 | Zebra Z4Mplus Label Printer
Mar 08, 2008 | Office Equipment & Supplies
99,339 people viewed this question
Usually answered in minutes!