Question about Washing Machines
Remove the entire dispenser from the machine by pushing down on the catch usually rear left side. Take out the divider from the bleach and fabric softener and clean as much goo as you can get our of there using a toothpick or small screwdriver. Check the tube sections and clean completely. Test by putting it back together and slowly pouring water in the dispenser and it should fill then start draining once the level gets high enough. Stop filling and if level it should empty itself out.
You can help prevent this by diluting the softener in the dispenser without filling to the max.
Posted on Sep 18, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Here is a tip that I wrote about what I found out about the fabric softener not dispensing into the washer...
Fridgidaire Washing Machine Fabric Softner not going into washer
Feb 21, 2011 | Frigidaire GLTF1240A Front Load Washer
Oct 09, 2010 | Frigidaire ATF6000ES Front Load Washer
Aug 24, 2010 | Frigidaire Affinity ATF7000E Front Load...
Nov 30, 2009 | Frigidaire GLTF2940ES Front Load Washer
Sep 03, 2009 | Frigidaire ATF6000ES Front Load Washer
Feb 14, 2009 | Maytag Neptune MAH5500B Front Load Washer
Jan 07, 2009 | Kenmore Elite 45986 Front Load Washer
Mar 16, 2008 | Whirlpool Duet GHW9150P Front Load Washer
143 people viewed this question
Usually answered in minutes!