Question about RS1000 OLED 2Way OLED Remote Start w 6 Channel Alarm
REMOTE TRANSMITTER PROGRAMMING
1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in
ON position. Within 15 seconds.
2. Push the Valet switch 2 times and hold in on the 2
push, when a long chirp is heard then release the valet
switch. You are now in the Transmitter programming mode.
Press the Lock button on transmitter 1 until the siren
responds on Car with a confirming chirp; the first
transmitter is now programmed to Car.
Exit: Turn Ignition to 'OFF' position, or leave it for 15
seconds. 3 long chirps will confirm exit.
Note: If more than 4 transmitters programmed, the system
will only keep the last four.
The Valet switch is a little Red Push Button that should be
mounted under the lower left side of you dash or in the lower
left kick panel near the E-brake pedal.
This sis atndard programming for the 900,915,1000,and 100 units.
Posted on Feb 16, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 21, 2017 | Cars & Trucks
Feb 01, 2016 | Cars & Trucks
Jan 01, 2016 | LG Televison & Video
Feb 23, 2015 | 2009 Chrysler Town and Country
Sep 12, 2014 | Televison & Video
Jul 29, 2010 | RS1000 OLED 2Way OLED Remote Start w 6...
Jan 10, 2010 | HON 1 T-harness Remote Starter Wiring
Jul 30, 2011 | RS1000 OLED 2Way OLED Remote Start w 6...
1,031 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: