Amana Washing Machines - Recent Questions, Troubleshooting & Support

The model number is probably NTW4605EW0. Most appliance models from this manufacturer end with a number. Sears Parts Direct has the Use and Care manual for the NTW4605EW0 here: . Amana has addtional documents for the washer on their support page: . Use the drop-down menu and search box to locate the manuals and installation guide. The current link to the manual (in English) is .

I hope this helps. I don't see a printed copy of the manual available from Sears Parts Direct. You can print it yourself or take the file to a print shop (Kinkos, UPS store) later.

Cindy Wells

Amana Washing... | Answered on Nov 05, 2019

if the lid lock is broke it shouldn't be doing anything.
If it is broke, it needs to ne fixed/replaced.
If it is doing other things, more troubleshooting is necessary.

Amana Washing... | Answered on Nov 03, 2019

No, you probably need a new motherboard. When the power comes back it surges and is dirty power. Call in a service engineer and claim costs to the power utility for restitution. Ask tech for written documentation that the board failed due to power surge. Provide details of the date and time.

Amana Washing... | Answered on Sep 26, 2019

ask google or youtube

Amana Washing... | Answered on Sep 19, 2019

Add 1 cup vinegar then 1/2 cup baking soda to water It will fizz & clean &

Amana Washing... | Answered on Sep 19, 2019

remove it and take it outside and stick your garden hose in it and let it rip

Amana Washing... | Answered on Sep 19, 2019

For the Owner's Manual and information on your Amana, go here:

Good luck.

Amana Washing... | Answered on Sep 09, 2019

Sounds like a timmer to me.. got a couple bad cycles too bad its the main cycle

Amana LWA40A | Answered on Aug 30, 2019

Defective cycle timer or a defect in one of the elements controlled by the timer

Amana Washing... | Answered on Aug 22, 2019

Is it heating the water? Many machines won't continue the wash cycle if the water temperature isn't achieved. Usually caused by blown heater element. I'm not familiar with your machine but generally it's a matter of removing the back panel, disconnect the terminals to the heater element, undo fixing bolt and pull it out. Should have a resistance of around 50 ohms, but if you're water isn't getting warm it's probably open circuit, ie infinitely high resistance. Replacement element is usually around £20.

Amana Washing... | Answered on Jun 26, 2019

Clogged screen on water valve. Turn off both water faucets.Remove hose from valve. Pop out mesh or plastic screen. May be debris. Could be low pressure too if this doesn't help.

Amana Washing... | Answered on Jun 25, 2019

They are not designed to be bypassed. Replace the lid lock if defective

Amana Washing... | Answered on Jun 09, 2019

Not finding what you are looking for?
Amana Logo

1,966 questions posted

Ask a Question

Usually answered in minutes!

Top Amana Washing Machines Experts


Level 3 Expert

4363 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Virgil Watts

Level 2 Expert

233 Answers

Are you an Amana Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides