Beko Washing Machines - Recent Questions, Troubleshooting & Support
Hi everyone, how can I get into service mode in my BEKO WYA81643LE washing machine? Thank you
Start by turning the washing machine of with door shut.
Now turn the dial to the position 1 Which is normally the 90c hold the start /pause button down while you press the on/off button to on for a couple of seconds till light flashes
Now turn the dial to the position 6 and hold down a few seconds the next time you enter it should turn on all the lights now you are in self test diagnostic mode:
Every time you Press the on/off button it will change the test function.
1st all the lights will show
2nd will not do anything
3rd This will tell the motor to turn at standard wash speed clockwise with pump emptying.
4th This will tell the motor to turn at standard wash speed anticlockwise with pump emptying.
5th This will tell the motor to spin clockwise with pump emptying.
6th This will activate right hand compartment water valve. Please note machine will keep filling until you stop it.
7th This will activate left hand compartment water valve. Please note machine will keep filling until you stop it.
8th This will activate booth water valves together. Please note machine will keep filling until you stop it.
9th will not do anything
10th this will start fill cycle until water activates the pressure switch at normal fill level (Normally just below the glass on the door) when the Beko washing machine has reached the level it will start clockwise rotation at normal wash action and heat the water. Please note You Have to stop it manually.
11 this will activate the pump only to empty.
Press again and you are back at the start. Turn machine of and leave for a few minutes and the switch back on and you're in normal wash mode.
on Jan 12, 2019
Not finding what you are looking for?