Brother Computers & Internet - Page 9 - Recent Questions, Troubleshooting & Support

download registry mechanic 9 version type this activation name and key
Name....: Team CRD Serial..: 0VGB9A-4FF5T5-QABZ0K-ATPQF7-HWNRCK-X0QVPQ

Brother... | Answered on Sep 03, 2010

See if you can find it here:

Select the model of the typewriter.

Computers &... | Answered on Aug 22, 2010


Could you please tell me, the operating system of your computer and the printer model.


Brother... | Answered on Aug 14, 2010

How is the printer printing black and yellow color? Is it a smudge?

When I print, the pages are smudged with ink. What should I do?
- If smudged stains appear at the top center of the printed page:
  • Make sure the paper is not too thick or curled.
    Also, verify that the appropriate paper is being used and that the paper type set in the machine matches the media used.
  • Make sure the paper is not curled when you print on the back side of the paper with the Print Odd Pages and Print Even Pages settings.

- If smudged stains appear at the right or left corner of the printed page:
  • Make sure the paper is not curled when you print on the back side of the paper with the Print Odd Pages and Print Even Pages settings.

- If smudged stains appear on the reverse side or at the bottom of the page:
NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.
  • Make sure the printer platen is not dirty with ink.

    How to clean the machine's printer platen

    1. Unplug the machine from the AC power outlet.
    2. Lift the scanner cover until it locks securely in the open position.
    3. Clean the machine's printer platen(1) and the area around it, wiping off any scattered ink with a soft, dry, lint-free cloth.

    4. Close the scanner cover.

  • Make sure you are using Genuine Brother Innobella™ Ink.
    > Brother Genuine Supplies information

  • Make sure you are using the paper support flap.

    To use the paper support flap, pull out the paper support (1) until it clicks and unfold the paper support flap(2).


Brother... | Answered on Aug 03, 2010

Download the codec from

Install "K-Lite Codec Pack 6.2.0 Full" or "K-Lite Mega Codec Pack 6.2.0" and if you wish to use Windows Media Player(WMP) you have to default WMP as your Media Player during installation.

Brother... | Answered on Aug 01, 2010

U can use dix registry cleaner it will helpx u

Brother... | Answered on Jul 19, 2010

yes. but the correct answer is undifined

Brother... | Answered on Jul 17, 2010

Don't worry. you just have to install the driver for the same.... If you have already installed the driver then make sure that the PC and printer is in the same workgroup..... Still you are not able to fine the printer then in the web browser (of PC in which you wanna to install the network printer) type the ip address of the PC (to which printer is connected) then you will get some options in that one option is "printer", click on that....
Hope this has helped you... Thanks..

Brother... | Answered on Jul 14, 2010

Did you check the Brother website?
Another option is to use a driver finder program and download the installation software.

Brother... | Answered on Jun 17, 2010

Alright we can definitly help you with the issue if you could be more descriptive.

As i understand that you have to get your E-mail's back, please let me know if your trying to retrive your mails from a webclient like yahoo, Gmail or Hotmail or thick client's like Microsoft outlook or anyother.

Please describe. Do not put questions in one liner's.

Brother... | Answered on Jun 16, 2010

you have to change the BIOS/CMOS battery. the battery is defective already. that is the one causing the behind or late time and date.

Brother GeoBook... | Answered on Jun 04, 2010

HI irenepaine. I've installed this once and I know it could be a little tricky because you need to use the software to convert whatever design you want - from JPEG to the machine's type. Then you use the card to save the file and then connect it to the sewing machine and then, using the display select the file you want. You need to use like 2 different software to acomplish this. Also you can do it thru the USB cable. Since I can't remember - I'm sending you the brother support site. Please find the correct model and see if it helps.
Please dont forget to rate and provide positive feedback for our free support today. Thank you :D

Brother PED... | Answered on Apr 29, 2010

the card may be bad or damage or the card reader is bad or it is damage

Brother PED... | Answered on Apr 24, 2010

There is a specific order in which you have to install the printer. Do not plug in the Brother MFC until the installation software asks you to do so. If you have the software installed. Uninstall it, unplug the printer, and reboot. Then run the installation again, and plug in the printer when asked by the installation guide.

Computers &... | Answered on Mar 08, 2010

Same problem, did you find a solution ?


Brother... | Answered on Mar 02, 2010

it sounds like you may have a driver problem and possible the installation was not done properly. I would say. uninstall whatever you download and start from scratch as follows:

if you DO NOT have vista or windows 7 do this follow the instructions to install the sofware from the the manual

if you need to download the sofware in case you don't have the cd you can download the updated sofware from here

if you DO HAVE vista or windows 7 you need to download the software package from this page just go to the bottom and you'll see section for your operating system

Brother PED... | Answered on Jan 16, 2010

right click on icon click properties and set to xp

Brother PED... | Answered on Jan 07, 2010

it sounds like your office is on a domain . you will need to join that domain in order to print to your offices printer. locate the name of the domain and join the domain in order to print to the printer. make sure that the printer is you default printer.

Computers &... | Answered on Nov 11, 2009

If want to use a third party desktop publishing program, I would recommend to you the ClickBook from Blue Squirrel. I have been using ClickBook to print books and brochures and other desktop publishings.

Computers &... | Answered on Nov 04, 2009

Try using a different card. If the card is damaged it may not be read in the sewing machine.
Also , the card should be compatible with Babylock, but give them a call just to ensure there is no particular issue with this model. you find their number on the Babylock owner manual.
If the design is being saved, software should be OK, you can try reinstalling software and plugging the PED to a different USB port, but I don't think it will make a difference.
Test a different card to check if the card is faulty, if you do not have one, contact Brother.

Brother PED... | Answered on Oct 27, 2009

Not finding what you are looking for?
Brother Logo

-615 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

6004 Answers


Level 2 Expert

253 Answers

Are you a Brother Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides