Cameras - Page 3 - Recent Questions, Troubleshooting & Support
Flash settings cannot be changed...
Check and make sure multi shot or continuous shot is not selected (/BRK button between shutter button and options dial). Flash settings cannot be used with either multi shot or continuous shot, took me forever to figure that out... LOL
on Oct 09, 2019
I want to change language japan to English
Access the settings menu of your digital camera by pressing the appropriate key. The settings menu should allow you to change a variety of settings including the language, shutter speed and shooting mode.
A Nikon may have a menu under the wrench symbol. A Kodak Easyshare has a menu under 3 stacked lines. A HeroPro4 requires you press the Power button repeatedly to access the menu. So, you may need to consult the instruction book for your particular camera to learn how to find the settings/menu, make a selection, and confirm the selection.
on Oct 09, 2019
Panasonic Lumix System Error (zoom)
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
these at own risk as it may further damage the camera.
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
Other than that , I would take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
on Oct 05, 2019
Not finding what you are looking for?