Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support

on Kijji there is a bull calf for sale i did this before tie the bull calf to your printer and give it a good wack and if the thing runs it means you need a new printer and if it stays in the same spot it means its still good if it stays in the same spot go to where you purchased it from

The Office... | Answered on Mar 20, 2019

Pull the plug out and put it back in

HP Office... | Answered on Mar 20, 2019

That means that the laser in the printer is not working, you can bring it to staples are where you purchased it from

The Office... | Answered on Mar 20, 2019

co online and you should find a website

Xerox Office... | Answered on Mar 20, 2019

Clean the rollers with soapy water and leave to dry.

Office Equipment... | Answered on Mar 20, 2019

Many new printers come with a "starter" cartridge which may print several hundred pages and then needs to be replaced with a new "full load" cartridge. The standard cartridge for your machine is rated at about 1200 pages at 5% cover, so it is likely that a starter cartridge would give about 500pages at 5% cover. Please note the 5% cover bit means about 500 at 5%, about 250 at 10%, about 170 at 15% cover respectively.

Ricoh Office... | Answered on Mar 20, 2019

You will need to take the side panels off to get to the circuit boards. The Main board is often on the right hand side when looking from the front

HP Office... | Answered on Mar 20, 2019

First step in this kind of issue is check the data cable is properly socketed.
Second step is perform a copy operation directly from the printer. If this fails your issue is printer or cartridge, so swap out the cartridge and retry. If still no copy - your printer has an electronics fault.
Step three is try a document ( D2) from a different application (App2). If it prints the new document (D2) - your issue is with the original document (D1) or the application (App1) printing from. Try printing a different document (D3) from the original application (App1). If document D3 prints from App1 - the fault is in the document D1, and if document D3 fails to print - the fault is in App1.

Canon Office... | Answered on Mar 20, 2019

Sorting copies using the ADF

You can sort multiple copies. Pages will be

stacked in the order (1, 2, 3), (1, 2, 3)

and so on.

1 Press (Copy) to illuminate it in


2 Load your document.

3 Use the dial pad to enter the number of

copies you want (up to 99).

4 Press Options and ? or ? to select


Press Menu/Set.

5 Press ? or ? to select Sort.

Press Menu/Set.
6 Press Start.

I’m happy to assist further over the phone at

Brother MFC 7420... | Answered on Mar 20, 2019

there are still no driver that can support the windows 7 for Visioneer 4400. No luck for that as of this time

Visioneer 4400... | Answered on Mar 20, 2019

I would suggest that your first check for any updated drivers for your printer

Epson Dot Matrix... | Answered on Mar 20, 2019

You actually need a separate network drop for scanning and one for printing. Could you ever scan with this machine?

Kyocera Office... | Answered on Mar 20, 2019

Not finding what you are looking for?
Office Equipment & Supplies Logo

590,132 questions posted

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

5795 Answers


Level 3 Expert

84027 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides